background image

2

             

This product is intended for use for babies aged between 

0 and 6 months

, weighing up to a 

maximum of 8kgs.

IMPORTANT! 

Before assembly or each use, inspect this product for damaged hardware, loose joints, 

missing parts or sharp edges.
When a child is able to sit, kneel or pull itself up, the product should not be used anymore for this child.

DO NOT

 leave any object inside the product that could reduce its depth.

Be aware of the risk of open fires and other sources of strong heat, such as electric bar fires, gas fires etc.
Follow the manufacturer’s assembly instructions in detail to ensure the safety features of the bassinet/

cradle are not compromised. Failure to follow these warnings and instructions could result in serious injury 

or death.
It is recommended that the mattress used in this rocking bassinet be a snug fit and not exceed 38mm in 

thickness.

DO NOT

 use if any parts are missing or broken. Contact manufacturer for replacement parts and 

instructions if needed. Never substitute parts.
This is to minimise the risk of a child’s limb becoming caught in the gap.

• Read all instructions before assembly and use of the bassinet.
• Keep instructions for future use.
• Adult assembly is required.
• Tools required for assembly: (not included) Phillips Head Screwdriver and Wrench.
• Product features and styling may vary from photography.

SUFFOCATION HAZARD

: Discard all packing materials immediately after opening. Plastic bags and ties may cause 

suffocation or choking. For safety reasons ensure that after assembly is complete, that all tools, excess parts 

including plastic packaging is removed from the bassinet vicinity to prevent from being accessed by children.

FALL HAZARD

: To help prevent falls, do not use this product when infant begins to push up on hands and knees or has 

reached manufacturer’s recommended maximum weight of 8kgs, whichever comes first. 

Read all instructions before assembly and use of the bassinet. Keep 

instructions for future use.

FAILURE TO FOLLOW THESE WARNINGS AND INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR 

DEATH.

FALL HAZARD - TO PREVENT FALLS; DO NOT USE THIS PRODUCT WHEN INFANT BEGINS TO PUSH 

UP ON HANDS AND KNEES OR HAS REACHED THE MANUFACTURER’S RECOMMENDED MAXIMUM 

WEIGHT OF 8KGS, WHICHEVER COMES FIRST.
SUFFOCATION HAZARD - INFANTS HAVE SUFFOCATED; IN GAPS BETWEEN AN EXTRA PAD AND THE 

SIDE OF THE BASSINET/CRADLE, AND ON SOFT BEDDING.
USE ONLY THE PAD PROVIDED BY MANUFACTURER. 
NEVER ADD A PILLOW, COMFORTER, OR ANOTHER MATTRESS FOR PADDING.
CAUTION: RECOMMENDED MATTRESS (SUPPLIED) SIZE IS 385MM WIDE X 765MM LONG X 22MM 

IN THICKNESS MAXIMUM SIZE. IT IS RECOMMENDED THAT THE MATTRESS USED IN THIS ROCKING 

BASSINET BE A SNUG FIT AND NOT EXCESS 38MM IN THICKNESS.

SAFETY PRECAUTIONS

WARNING

Summary of Contents for Chloe



















Reviews: