- 25 -
Maintenance
7. Maintenance
7.1 Periodic Inspection Table
Proper inspection and maintenance will prevent accidents and breakdowns. To maintain the
machine's normal function and ensure daily safe operation, preform regular inspections according
to the chart below.
The regular inspection schedule includes yearly and monthly inspections and daily pre-operation
checks.
The chart below includes inspections which require technical knowledge or special tools
and measuring instruments. For difficult inspections, consult the dealer or a Canycom
service center.
Starting
Engine speed
Exhaust
Air cleaner
Tightening
Valve
clearance
No gas leak.
No cracks or defor-
mation in case. No
looseness at lid and
pipe.
No severe dirt.
No damage.
No looseness.
Proper clearance.
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Please contact your
Canycom distributor
Cleaning / Replacement:
See Page 36
Please contact your
Canycom distributor
Timing
Per-operation
Yearly
Monthly
Remarks
Item
Body
Engine
• Check if engine starts smoothly
and makes abnormal noise.
• Check if engine speed is proper
at idling and unloaded maximum
speed. Check for smooth opera-
tion.
• After warming up engine, run
engine from idling to high speed
and check exhaust gas color
and noise.
• Check for gas leak from muffler,
exhaust pipe, etc.
• Check case for cracks and
deformation, looseness at lid or
connecting pipe.
•
Check urethane foam paper
element for contamination
and damage.
• Check cylinder head and mani-
fold retaining bolts / nuts for
looseness.
* This check is not necessary if
no gas or water leak is found at
these areas.
• Check valve clearance.
* This check is not necessary if no
valve-derived abnormal noise is
heard and the engine operates
smoothly.
Action
Acceptable condition
• Accelerate engine and check
for axle lever drag, engine stall,
and knocking.
Smooth start.
No abnormal noise.
Proper engine speed.
Smooth and continu-
ous engine operation.
No drag, engine
stall, or knocking.
Normal exhaust gas
color / noise.
