Installation Instructions
K4W120-210-310
15
Cable Management - Covers (K4W210/310 only)
1.
Route cables from display through cable management
covers (V) as desired. (See Figure 28)
2.
Install cable management covers (V) onto array arms (X
and Y). (See Figure 28)
Figure 28
Cable Management - Clips
1.
Use two #10-24 x 3/8” button head cap screws (E2) to
attach two tie mounts (E1) to upper mounting arm. (See
Figure 29)
2.
Use two #10-24 x 3/8” button head cap screws (E2) to
attach two tie mounts (E1) to lower mounting arm. (See
Figure 29)
Figure 29
3.
Route cables along mounting arms. (See Figure 30)
4.
Use cable ties (not included) to secure cables to tie clips
(E1). (See Figure 30)
NOTE:
Leave enough slack in the cables so that arm may still
swing without resistance from the cables.
Figure 30
(V) x 2
1
1
2
2
(K4W310 shown)
(E2) x 2
1
(E1) x 2
(E2) x 2
2
(E1) x 2
cable
(example)
cable ties (not included)
4
