K4W120-210-310
Installation Instructions
12
4.
Pick up and align display so that screws (N or M) (installed
on the back of the display in the previous step) fit into the
mounting holes on the faceplate. Lower the display firmly
into place. (See Figure 16)
Figure 16
5.
Slide two remaining selected spacers (Q or R) in between
faceplate and display, positioning them over the
lower
two
mounting holes. (See Figure 17)
6.
Install two remaining selected screws (N or M) through
lower
two mounting holes on faceplate, selected spacers (Q
or R) into the
lower
mounting holes on the display. (See
Figure 17)
Figure 17
7.
Tighten all four screws. Do not over-tighten!
8.
Repeat Steps 3-7 for other displays.
Wall Cover Installation
CAUTION:
Wall covers are fragile and may be damaged or
broken if installed with excessive force! Use caution when
installing and removing wall covers.
1.
Install top cover (K) onto upper section of wall plate. (See
Figure 18)
2.
Install bottom cover (L) onto lower section of wall plate.
(See Figure 18)
Figure 18
Adjustments
Pivot Adjustment (Array Arm) (K4W210/310 only)
1.
Array arms may pivot toward the front of mount up to 20° per
arm. (See Figure 19)
2.
When arms are at desired pivot position, lock pivot position
by tightening 3/8-16 x 2 3/4” socket head carriage screws
(A1) using 5/16” hex key (E5). (See Figure 19)
Figure 19
(Q or R) x 2
(N or M) x 2
3
faceplate
(array arm not shown for clarity)
4
(Q or R) x 2
(N or M) x 2
6
faceplate
(array arm not
shown for clarity)
1
2
(K)
(L)
(A1) x 2
2
