Installation Instructions
K4W120-210-310
13
Pivot Adjustment (Column Arm)
1.
Use handle to extend or collapse column arm (Z) as
desired. (See Figure 20)
2.
(Optional) Loosen or tighten column arm pivot tension
screws as desired to increase or decrease pivot tension.
(See Figure 20)
Figure 20
Mount Height Adjustment
The TS218SU may be adjusted 1/2” up or down after
installation to the wall.
1.
Remove display from main assembly.
2.
Remove top and bottom covers (K and L) to expose height
adjustment screws.
3.
Use 1/8” hex key (U) to loosen four height adjustment
screws. (See Figure 21)
4.
Raise or lower mount until desired height is achieved. (See
Figure 21)
Figure 21
5.
Tighten four height adjustment screws. (See Figure 21)
6.
Reinstall top and bottom covers (K and L).
7.
Reinstall display.
Display Height Adjustment (K4W120 only)
NOTE:
Remove display from faceplate in order to expose
height adjustment screws.
1.
Loosen height adjustment screws for specific display that
will be adjusted. (See Figure 22)
2.
Adjust display to desired height. (See Figure 22)
3.
Tighten height adjustment screws to lock display’s position.
(See Figure 22)
Figure 22
Faceplate Assembly Removal
K4W210/310 Faceplates
1.
Remove hex head bolt from bottom of faceplate assembly.
(See Figure 23)
2.
Slide out removable plate from bottom of faceplate
assembly. (See Figure 23)
Figure 23
3.
Remove faceplate assembly from array arm. (See Figure
23)
arm extended
arm collapsed
pivot tension
screws
(K4W310 shown)
4
3
5
2
2
1
3
1
3
removable plate
1
2
3
