Installation Instructions
FCA800V/VE
11
NOTE:
For minimum extension on the FCA800VE model, the
extender box holder (D) may be installed as part of the
installation of the camera mount to the main bracket.
Skip Step 16 if mounting the FCA800VE to minimum
extension and installing the extender box holder (D).
15. (For
minimum extension)
Slide upright bracket (A) behind
main bracket (B). (See Figure 15)
16. (For
minimum extension - 800V or VE)
Use 1/4-20 x 5/8"
hex head flange bolt (M) and center washer (H) to secure
upright bracket (A) to main bracket (B). (See Figure 15)
Figure 15
17. (For
minimum extension - 800VE only)
Use 1/4-20 x
1 1/2" button head cap screw (Q) and 1/4-20 hex nut (N) and
large washer (P) to secure extender box holder (D) and
upright bracket (A) to main bracket (B). (See Figure 16)
18. (For
minimum extension - 800VE only)
Tighten 1/4-20
hex nut (N) to fully secure upright bracket (A) to main
bracket (B). (See Figure 16)
Figure 16
Above Installation
Assembling Camera Mount to Upright Bracket
1.
Attach camera housing (Z) to camera mount (F) using two
#8-32 x 3/8” Phillips flat head machine screws (AA). (See
Figure 17)
IMPORTANT ! :
Make sure straight slot on camera
housing is pointing in the proper direction. (See Figure
17)
Figure 17
2.
(Standard to cart/ceiling)
Use three 1/4-20 x 1/2” button
head cap screws (L) and two large washers (P) to secure
camera mount (F) to upright bracket (A). (See Figure 18)
Figure 18
(M)
16
(H)
15
(A)
(B)
(rear view)
(Below Cart/Ceiling Minimum
- 800V or 800VE)
(Q)
17
15
(rear view)
(Below Cart/Ceiling Minimum - 800VE only)
(A)
(D)
(N)
(P)
18
(B)
(AA) x 2
(Z)
(F)
1
straight slot
(L) x 3
2
2
(P) x 2
(F)
(A)
(Standard - to Cart/Ceiling)
