FCA800V/VE
Installation Instructions
8
Attaching Accessory to Wall Mount
NOTE:
If attaching to cart or ceiling mount, proceed to
Attach
Accessory to Cart/Ceiling Section
.
1.
Use two 1/4-20 x 1/4” button head cap screws (R) and two
large washers (P) to secure support bracket (C) to main
bracket (B). (See Figure 5)
CAUTION:
Slide bracket with caution so that the bracket
does not scratch or damage the wall!
2.
Slide main bracket (B) behind wall mount rails until support
bracket (C) rests on top of wall mount rail. (See Figure 5)
Figure 5
3.
Slide second support bracket (C) underneath lower rail on
wall mount, lining up holes on support bracket (C) to main
bracket (B). (See Figure 6)
4.
Use two 1/4-20 x 1/4” button head cap screws (R) and two
large washers (P) to secure support bracket (C) to main
bracket (B). (See Figure 6)
Figure 6
NOTE:
Refer to Table 1 and dimension drawings on pages 3-
4 to determine the extension level based on extension
distance from mount center.
Table 1:
Below Wall Mount
5.
(For
maximum extension
) Use #10-32 x 3/8” button head
cap screw (S) and small washer (K) to secure adapter plate
(V) to main bracket (B). (See Figure 7)
6.
(For
maximum extension
) Use two #10-24 lock nuts (J) to
secure upright bracket (A) to main bracket (B) and adapter
plate (V). (See Figure 7)
Figure 7
2
(R) x 2
1
(P) x 2
(B)
(C)
(Below Wall)
3
wall mount rails
4
(R) x 2
(C)
(P) x 2
(B)
(Below wall)
Extension distance from center of mount (in.)
11.0-12.5
Minimum
12.5-14.8
Intermediate
14.8-17.4
Maximum
(Below wall - maximum)
(V)
(B)
(A)
(K)
(S)
5
(J) x 2
6
