FCA800V/VE
Installation Instructions
10
Installing to FCA623 Accessory
IMPORTANT ! :
Steps 6-10 only apply if installing to
FCA623 accessory.
6.
Use two 1/4-20 x 7/16” button head cap screws (T), two
large washers (P) and two 3/5” spacers (U) to secure
support bracket (C) to main bracket (B). (See Figure 11)
7.
Slide main bracket (B) onto front of cart/ceiling mount head
assembly until support bracket (C) rests on top of cart
mount head assembly. (See Figure 11)
Figure 11
8.
Slide second support bracket (C) underneath cart mount
head assembly, lining up holes on support bracket (C) to
holes on main bracket (B). (See Figure 12)
9.
Slide two 3/5” spacers (U) in between support bracket (C)
and main bracket (B). (See Figure 12)
10. Use two 1/4-20 x 7/16” button head cap screws (T) and two
large washers (P) to secure support bracket (C) to main
bracket (B). (See Figure 12)
Figure 12
NOTE:
Refer to Table 2 and dimension drawings on pages 3-
4 to determine the extension level based on extension
distance from mount center.
Table 2: Below Cart/Ceiling Mount
11. (For
maximum extension
) Use #10-32 x 3/8” button head
cap screw (S) and small washer (K) to secure adapter plate
(V) to main bracket (B). (See Figure 13)
12. (For
maximum extension
) Use two #10-24 lock nuts (J) to
secure upright bracket (A) to main bracket (B) and adapter
plate (V). (See Figure 13)
Figure 13
13. (For
Intermediate extension
) Use 1/4-20 x 5/8" hex head
flange bolt (M) and center washer (H) to secure upright
bracket (A) to main bracket (B). (See Figure 14)
14. (For
Intermediate extension
) Use two #10-24 lock nuts (J)
to secure upright bracket (A) to main bracket (B) and
adapter plate (V). (See Figure 14)
Figure 14
(rear view)
(C)
7
(T) x 2
6
(P) x 2
(B)
(Below cart with FCA623 accessory)
(U) x 2
(rear view)
(C)
(T) x 2
10
(U) x 2
8
(B)
(Below cart with FCA accessory)
(P) x 2
9
Extension distance from center of mount (in.)
10.6-12.1
Minimum
12.1-16.4
Intermediate
16.4-19.0
Maximum
(Below cart/ceiling -
(V)
(B)
(A)
(K)
(S)
11
(J) x 2
12
maximum)
(rear view)
13
(M)
(H)
(J) x 2
14
(V)
(Below Cart/Ceiling -
Intermediate)
(rear view)
additional
holes for
intermediate
configuration
(B)
(A)
