8
Installation Instructions
CABLE MANAGEMENT
WARNING: Make sure your cables do not run through
a pinch point.
1. Route power/audio/video cables through the cable channel
in top arm (see Figure 5), allowing sufficient slack in
cables for extension and avoiding pinch points, and secure
cables using two clips and two tiewraps (40, not shown).
2. Route power/audio/video cables along bottom arm (see
Figure 6), using tiewraps (40, not shown) to secure cables
to each arm, and through cable channel.
CAUTION:
To prevent equipment damage, do not route
cables through holes in the display mounting
plate
.
3. Route power/audio/video cables to an open area behind
the mounting plate (not shown). Leave a sufficient amount
of slack in cables to allow for connection and extension
where needed.
Cables
Tiewraps
Top Cable
Management Channel
Figure 5. Cable Management Channel (Top)
Management Channel
Bottom Cable
Figure 6. Cable Management Channel (Bottom)
Summary of Contents for 25MWR
Page 3: ...3 Installation Instructions DIMENSIONAL DRAWING...
Page 12: ......
