10
Installation Instructions
SWING ARM ADJUSTMENTS
The single swing arm, which is jointed, is shipped installed in
the center of the top and bottom mounting brackets, which is
the standard mounting configuration.
The top and bottom mounting brackets have slotted holes,
allowing for lateral adjustment of the swing arm.
After the top and bottom mounting brackets have been
installed between two wood studs 16” on center, the swing arm
can be adjusted or moved off center, depending on the location
of the mount, the size of the display, and the lateral movement
needed to rotate the display.
The swing arm can be adjusted, as follows:
•
Adjusting the Swing Arm Off-Center
With some disassembly and reassembly, you can adjust the
swing arm up to 1-inch to the left of center or up to 1-inch
to the right of center.
•
Reconfiguring the Swing Arm Left of Center
With some disassembly and reassembly required, you can
move the swing arms to the left of center by reconfiguring
the mount. Use the first and third slotted holes in the top
and bottom mounting brackets.
•
Reconfiguring the Swing Arm Right of Center
With some disassembly and reassembly, you can move the
swing arms to the right of center by reconfiguring the
mount. Use the third and fifth slotted holes in the top and
bottom mounting brackets.
Adjusting the Swing Arm Off Center
Perform this procedure to adjust the adjust the swing arm up to
1-inch to the left of center or up to 1-inch to the right of center.
1. Remove the display from the mount.
2. Remove four bolts (two on the top and two on the bottom)
securing the swing arm assembly to the top and bottom
mounting brackets (see Figure 12).
3. Move the swing arm assembly to desired location.
•
For left of center, use the mounting hole slots shown
in Figure 12.
•
For right of center, use the mounting hole slots shown
in Figure 12.
4. Reinstall four bolts (two on the top and two on the bottom)
on the top and bottom mounting brackets.
5. Tighten the bolts.
6. Install the display on the mount.
Figure 12. Swing Arm Adjustment –
Slightly Off Center
Top Bolts
Mounting Holes
Mounting Holes
Left of Center
Right of Center
Summary of Contents for 25MWR
Page 3: ...3 Installation Instructions DIMENSIONAL DRAWING...
Page 12: ......