Chicco SDRAIETTA BOUNCER, Manual

Page: 10 / 48

10 11
Bouncer
WARNING: IMPORTANT! KEEP FOR FUTURE REFERENCE..
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY TO
GUARANTEE YOUR CHILD’S SAFETY AT ALL TIMES.
WARNING: BEFORE USE, REMOVE AND DISPOSE OF ALL
PLASTIC BAGS AND PACKAGING MATERIALS AND KEEP
THEM OUT OF REACH OF CHILDREN.
WARNINGS
• WARNING: Never leave the child unattended.
• WARNING: It is dangerous to use this reclined cradle on an
elevated surface, e.g. a table, chairs etc.
• Recommended age range: from birth until 9 Kg in weight
(around 6 months old).
• WARNING: Do not use the reclined cradle once your child
can sit unaided, who can roll over or are able to stand up
using their hands, knees and feet.
• Do not use the bouncing chair for more than one child at a
time.
• Never leave the bouncing chair on surfaces that are not per -
fectly level.
• WARNING: Make sure that the cover is always fitted cor -
rectly on the bouncing chair frame.
• WARNING: Never use the toy bar as a handle to carry the
bouncing chair.
• Always use the safety harness and the crotch strap when the
child is in the bouncing chair; adjust the length of the straps
as necessary.
• Do not allow children to play unsupervised near the bounc -
ing chair.
• Do not use the bouncing chair if some of its parts are bro -
ken, torn or missing.
• Do not use accessories, spare parts, or any component not
supplied by the manufacturer.
• To prevent the risk of fire, never place the bouncing chair
near electrical appliances, gas cookers or other sources of
intense heat.
• WARNING: This reclined cradle is not intended for pro -
longed periods of sleeping.If your child needs to rest, it is
recommended to move them to a cot or bed.
• WARNING: Never use this bouncing chair to carry a child in
motorised vehicles.
• WARNING: Always check that all the components are fitted
and assembled correctly.
• WARNING: Periodically check for worn parts, loose screws,
worn or frayed fabrics and immediately replace any dam -
aged parts.
• WARNING: Do not place the bouncing chair with the child
inside near windows or walls, where strings, curtains or oth -
er objects may be used by the child to climb out of the chair,
with the consequent risk of suffocation and/or strangula -
tion.
• WARNING: Do not place the bouncing chair near windows
or walls, to prevent the child from affecting the stability of
the bouncing chair, making it topple over.
SAFETY OF THE ELECTRICAL PARTS
• WARNING: Do not attach any string to lengthen the toy
fasteners on the bar and do not make any knots or loops:
This could cause accidental formation of running knots that
could lead to strangulation. This toy must only be used un -
der adult supervision.
• Check the toy regularly for signs of wear and damage and
to ensure that it is assembled correctly. Should any part
be damaged, do not use the toy and keep it out of reach of
children.
• WARNING: never use the toy bar as a handle to carry the
bouncing chair.
• WARNING: this product must only be assembled by an
adult.
• WARNING: batteries must only be fitted by an adult.
• Only use alkaline batteries of the same type or equivalent to
the type recommended for the correct function of this prod -
uct. (for the toy: LR6-AA ; for the vibration block : LR20-D).
• WARNING: make sure the batteries are fitted with their
poles in the right direction.
• Never mix new and old or different types of batteries.
• Always keep batteries and tools out of the reach of chil -
dren.
• Do not short-circuit the battery terminals.
• Always remove spent batteries from the toy to avoid the
danger of leakage from the battery damaging the product.
• Always remove the batteries if the product will not be used
for a long period of time
• Remove the batteries from the toy before disposing of the
product.
• Do not burn or dispose of old batteries into the environ -
ment. Dispose of them at an appropriate differentiated col -
lection point.
• If the batteries happen to leak liquid, replace them immedi -
ately, making sure you clean the compartment beforehand;
wash your hands thoroughly if you come into contact with
any such liquid.
• Always dispose of leaking batteries immediately: they can
cause burns or other types of injuries.
• Do not attempt to recharge non-rechargeable batteries:
they might explode.
• The use of rechargeable batteries is not recommended, as
the toy may not work properly.
• If using rechargeable batteries, remove them from the toy
before recharging them.
• Do not leave the product out in the rain; water infiltrations
will damage the electronic circuit.
CARE AND MAINTENANCE
FABRIC COMPOSITION
FABRIC COVER: All new materials. Outer cover: 100% polyes -
ter. Padding: 100% polyester.
INSERT PILLOW: All new materials. Outer cover: 100% polyes -
ter. Padding: 100% polyester.
BLANKET: All new materials. 100% polyester.
• This product requires periodic maintenance.
• The cleaning and maintenance operations must only be car -
ried out by an adult.
• Periodically inspect the bouncing chair to check for broken,
torn or missing parts: if this is the case, do not use it.
• Please refer to the care label for instructions on cleaning the
chair.
GB
Hand wash in cold water
Do not bleach
Do not use a dryer
Do not iron
Do not dry clean
• Check that the fabric and stitching are in good condition
each time you wash it.
• Prolonged exposure to direct sunlight can cause the fabric
to fade.
MAINTENANCE
Only use water and a soft damp cloth to clean the toy bar and
the vibration block
(GB) This product complies with EU Directive
2002/96/EC.
The crossed bin symbol on the appliance indicates
that the product, at the end of its life, must be dis -
posed of separately from domestic waste, either by taking it to
a separate waste disposal site for electric and electronic appli -
ances or by returning it to your dealer when you buy another
similar appliance. The user is responsible for taking the appli -
ance to a special waste disposal site at the end of its life. If
the disused appliance is collected correctly as separate waste,
it can be recycled, treated and disposed of ecologically; this
avoids a negative impact on both the environment and health,
and contributes towards the recycling of the product’s materi -
als. For further information regarding the waste disposal serv -
ices available, contact your local waste disposal agency or the
shop where you bought the appliance.
COMPONENTS
A - Legs
B- Seat
BB - Vibration block (batteries not included)
C – Insert pillow
D- Blanket
E – Toy bar (batteries not included)
ASSEMBLY
Before assembling the bouncing chair it is recommended to
insert the battery in the vibration block BB.
1. Remove the cover from the bottom of the seat, sliding the
fabric off the tubes until the upper section of the vibration
block BB is uncovered (diagram 1).
2. Use a screwdriver to unscrew the vibration block battery
compartment, see Diag.2. Insert a D type battery and screw
the compartment cover back in place.
3. Rotate the legs A outwards and connect them to the seat as
seen in Diagram 3A, 3B. This operation can only be performed
by inserting the legs in a specific direction to avoid errors.
Check that the metal pin sticks out of the relative holes cor -
rectly (Diagram 4). You will hear it click into place; try and pull
it out to make sure it is fitted correctly. Also make sure that the
bouncing chair carrier handles are on the outside of the frame
(diagram 5).
4. The insert pillow C is ideal for use from birth and can be re -
moved as required later on. To fasten it to the seat, insert the