Chicco OHLaLa, Instructions For Use Manual

Page: 11 / 72

10 11
months.
• The parking device shall be en-
gaged when placing and removing
the children.
• Always apply the brakes whenever
the stroller is stopped.
• Never leave the stroller on a sloped
surface, with a child on board, even
with the brakes engaged.
• Do not overload the storage bas-
ket. Maximum weight 3 kg.
• Any additional load placed on the
handle and/or on the backrest
and/or the sides of the stroller will
affect the stability of stroller.
• Do not carry more than one child
at a time.
• Do not use accessories, replace-
ment parts, or any component not
supplied or approved by the man-
ufacturer / distributor.
• Do not use this product if some
parts are broken, torn or missing.
• Before assembly, check that neither
the product nor any of its compo-
nents have been damaged during
transportation. In this case, do not
use and keep out of reach of children.
• During these operations, ensure
that the moving parts of the stroll-
er will not come into contact with
your child.
• Make sure that the person using
the stroller knows how to do it in
the safest way.
• This product must only be used by
an adult.
• The product must be assembled by
an adult.
• To avoid all strangulation risks, nev-
er give children objects with cords
or strings attached, or leave them
with in proximity of such objects.
• Never use the stroller on staircases
or escalators: you could suddenly
lose control of it.
• Always pay attention when going
up and down steps or pavements.
• If the stroller has been exposed di-
rectly to sunlight for a long time,
you must let it cool down be-
fore placing your child inside of it.
Prolonged exposure to direct sun-
light may cause the colour of the
materials and fabric to fade.
• Prevent the stroller from contact
with salty water. It might cause the
formation of rust.
• Do not use the stroller on the
beach.
• When unused, the stroller should
be kept out of reach of children.
TIPS FOR CLEANING AND MAINTENANCE
This product requires periodical maintenance.
Cleaning and maintenance operations must be performed
exclusively by an adult.
CLEANING
The lining can be removed (please see the section FITTING
AND REMOVING THE STROLLER LINING).
Clean the fabric parts using a wet sponge and neutral soap.
Periodically wipe clean plastic parts with a soft damp cloth.
Always dry the metal parts to prevent the formation of rust
if the folding cot has come into contact with water.
Below are the cleaning symbols and their meanings:
Wash by hand in cold water
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
MAINTENANCE
Lubricate the moving parts only if necessary, with a light appli-
cation of a silicone based lubricant.
Regularly check the condition of the wheels and, keep them
clean from dust and sand. To avoid friction that may prevent
correct operation of the stroller, make sure that all the mov-
able plastic parts along the metal frame are clean from dust,
dirt or sand.
Keep the stroller in a dry place.
GENERAL INSTRUCTIONS
OPENING THE STROLLER
WARNING: When opening the stroller, make sure that your
child or other children are at a safety distance.
WARNING:
Make sure that during these operations the mov-
ing parts of the stroller will not come into contact with your
child.
1. Push switch A to the left and press button B at the same time
(fig. 1). Pull the handle up to open the stroller until you hear
a click confirming locking (fig. 2).
WARNING:
Before use, make sure that the stroller is locked
in open position, checking that the mechanism is actually
locked.
HOW TO ASSEMBLE THE FRONT WHEELS
2. Fit the front wheels on the stroller until they are locked in
position (fig. 3).
Repeat this procedure for the other wheel lock.
WARNING:
Before use, ensure that the wheels are correctly
locked into position.
ASSEMBLING THE REAR WHEELS
3. Fit the rear axle into relevant slots in the frame until you hear
it click twice into place (fig. 4).
WARNING:
Always check the rear axle is fitted properly before
using the stroller.
CARRY-ALL BASKET
4. To fasten carry-all basket, insert the belts with snap button in
the relevant slots (fig. 5).
5. Fasten the lower belts of the basket to the U-shaped tube
(fig. 6) and fasten them with the Velcro.
BUMPER BAR
6. To fasten the bumper bar, fit it from above on the two pins
located at the ends of the armrests until you hear it click into
place (fig. 7).
7. To pull out the bumper bar, press the two buttons at the
extremities and pull it up (fig. 8).
8. You can also open the bumper bar on one side only to facil-
itate placing your child in the seat (fig. 8A).
WARNING:
Never use the bumper bar to lift the stroller up
with the child sitting in it.
HOW TO USE THE SAFETY HARNESS
This stroller has a five-point safety harness featuring two shoul-
der straps, two adjustment holes, a waist strap and a crotch
strap with buckle.
9.
WARNING:
To use it with children from birth to approx. 6
months of age, you must use the shoulder straps by thread-
ing them first through the two adjusting holes (fig. 9).
10. After laying the child in the stroller, fasten the straps (Fig.
10) by passing first the two forks (A) inside the shoulder
strap buckle (B) and then inside the crotch strap buckle (C);
Adjust the height of the shoulder straps so that they ad-
here to your child's shoulders (fig. 11).
Make sure that the harness straps are fitted correctly.
To unfasten the waist strap, press and pull the side prongs.
WARNING: The safety harness must always be fastened to
guarantee complete safety for your child.