background image

- Failure to follow these warnings and assembly instructions could result in serious injury or death.
- Read all instructions before assembling crib.  Keep instructions for future use.

-Infants can suffocate on soft bedding.  Never add a pillow or comforter.  Never place additional padding 
under an infant.
-To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless 
otherwise advised by your physician.

Strangulation Hazard:

- Strings can cause strangulation!  DO NOT place items with a string, cord or ribbon around a child’s neck, 
such as hood strings or pacifier cords.  DO NOT suspend strings over crib or toddler bed, or attach strings to 
toys for any reason.
-To help prevent strangulation, tighten all fasteners.  A child can trap parts of the body or clothing on loose 
fasteners.
- DO NOT place crib or toddler bed near windows where cords from blinds or drapes may strangle a child.

Fall Hazard:

- When child is able to pull to standing position, set mattress to lowest  position and remove bumper pads, 
large toys and other objects that could serve as steps for climbing out.
-When child is able to climb out or reaches the height of 35 inches (90 cm), the crib shall no longer be used 
and the child should be placed in a youth or regular bed.       

      

CAUTION:

  ANY MATTRESS USED IN THIS CRIB 

MUST BE AT LEAST 27-1/4 INCHES (69 cm) BY 51-5/8 

INCHES (131 cm) WITH A THICKNESS NOT EXCEEDING 

6 INCHES (15 cm).

- Check this product for damaged hardware, loose joints, missing pats or sharp edges before and after 
assembly and frequently during use.  Securely tighten loose bolts and other fasteners.  DO NOT use crib if any 
parts are missing, damaged, or broken.  Contact The Land of Nod® for replacement parts and instructional 
literature if needed.  DO NOT substitute parts.
- If refinishing, use a non-toxic finish specified for children’s products.
- Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
- Infants can suffocate in gaps between crib sides and a mattress that is too small.
- Periodically check to see that all bolts are securely tightened.
- To clean crib: Wipe with clean soft cloth dampened with a mild cleanser and water.  Rinse with clean water 
using a soft cloth, and dry thoroughly.
- Follow warnings on all products in a crib.
- When a vaporizer is in use, always aim vapor steam away from the crib as well as away from other wood 
furniture.   

WARNING:

!

!

WARNING:

!

The Land of Nod

8135 River Drive • Morton Grove, IL 60053 • p: (800) 933-9904 • e: [email protected] • www.landofnod.com

Larkin Toddler Rail 

Assembly Instructions

Made in China - r11

 

Summary of Contents for Larkin Toddler Rail








Reviews: