Chicco OHlala 3, Manual

Page: 15 / 16

15
WARNING:
In the case of removal of the fabric part (e.g., for
washing), make sure to reassemble the waist strap correctly
making it run through the relevant holes in the fabric.
The harness must be re adjusted.
To make sure that the belts are fastened properly to the an-
choring points, after placing your child inside the stroller, pull
the end parts of the belts firmly.
HOW TO ADJUST THE BACKREST
The inclination of the backrest is adjustable with a belt adjust-
ment mechanism.
11. To lower the backrest, use the rear adjustment system by
pressing the buttons of the tongs (fig.12) and adjust the
position until you reach the desired inclination.
Vice versa, to raise the backrest, press the two lateral buttons
of the adjustment tongs and pull the belt until you reach the
desired position.
WARNING: The child’s weight can make these operations
more difficult.
REAR BRAKES
The rear wheels have linked brakes, which can be applied si-
multaneously on both rear wheels by using the support tube.
12. To apply the brakes, press one of the two pedals on the
sides of the rear wheels down (fig. 13).
13. To release the brakes, press one of the two pedals on the
sides of the rear wheel group up (fig. 14).
SWIVEL WHEELS
14. To make the front wheels swivel, lower the lever fitted be-
tween the two wheels.
Use the swivel wheels on smooth surfaces.
To lock the wheels, raise the lever (fig. 15).
WARNING: The swivel wheels make the stroller easier to han-
dle; it is recommended to use the wheels in fixed mode on un-
even ground to guarantee better stability (on gravel, unpaved
roads, etc.).
WARNING:
Both wheels must always be locked or unlocked
at the same time.
SUN CANOPY
15. To fit the canopy, fasten the plastic clip to the frame’s tube
(fig. 16) and the velcro strips and snap buttons in the ap-
propriate positions (fig. 17A and 17B).
WARNING:
The hood must be fixed on both sides of the stroller.
Ensure that the hood is correctly secured into position.
To remove the canopy from the frame, detach the velcro strips
and the plastic clips.
16. To open the canopy, push the front arch forward (fig. 18).
To close it, repeat the steps in reverse order.
ADJUSTABLE LEGREST
The legrest can be adjusted in 2 positions.
17. To adjust it, use the buttons under the leg rest (fig. 19).
FOLDING THE STROLLER
WARNING:
When opening the stroller, make sure that your
child or other children are at a safety distance.
Make sure that during these operations the moving parts of
the stroller will not come into contact with your child.
Before closing the stroller, make sure that the storage basket is
empty and that the hood is closed.
The stroller has a closing device that can be used with one
hand.
18. To fold the stroller, push switch A to the left and press but-
ton B at the same time (fig. 1).
19. Push the handle forward to fold the structure (fig. 20).
The stroller will lock automatically in closed position. Turn the
handle downwards until reaching the maximum compactness
(Fig. 21). When closed, the stroller stands on its own.
FITTING AND REMOVING THE STROLLER LINING
20. To remove the stroller lining, open the snap button under
both sides of the seat (fig. 22), release the velcro on the
tube (fig. 23) behind the backrest and remove the lateral
fabric flaps of the backrest (fig. 24).
21. Starting from the legrest, remove the fabric (fig. 25). Detach
the velcro strips under the seat, pull out the crotch strap
belt, and remove the waist straps from the relevant holes
in the backrest (fig. 26) until it is removed completely from
the backrest (fig. 27).
To fit the lining on the stroller again, repeat the steps illustrated
above in reverse order.
ACCESSORIES
WARNING:
The accessories described below may not be
included in some product versions. Please read carefully the
instructions on the accessories available for the model pur-
chased.
SHOULDER STRAPS AND CROTCH STRAPS
Ohlalà stroller can be provided with padded shoulder straps and
a soft crotch strap to ensure safety and comfort of your child.
22. Fit the pads over the straps (fig. 28) and fit the crotch strap
inside the padding (fig. 29).
WARNING:
Adjust the width of the waist belt if needed, press-
ing on the buckles.
WARNING:
To ensure your child’s safety, it is necessary to al-
ways use the safety harness.
RAIN COVER
23. To fit the rain cover, fasten the straps around the stroller’s
frame, in the positions shown in Fig. 30 (the steps are to be
repeated on both sides of the stroller).
When you have finished using the rain cover, allow it to dry
properly if it is wet.
WARNING:
The rain cover cannot be used on the stroller with-
out hood, as it may cause suffocation.
WARNING:
When the full-cover rain cover is fitted on the
stroller, never leave it exposed to direct sunlight with the child
inside, as the temperature will rise considerably.
WARRANTY
The product is guaranteed against any conformity defect in
normal conditions of use as provided for by the instructions
for use. The warranty shall not therefore apply in the case of
damages caused by improper use, wear or accidental events.
For the duration of warranty on conformity defects please re-
fer to the specific provisions of national laws applicable in the
country of purchase, where provided.