ENGLISH
.
Cod. 9828093300 00 - Vers. 04/2019 - 17
Display
The display (3) shows:
-
The status of the compressor using pictograms.
-
The value of the supply pressure.
-
The oil temperature at the screw compressor outlet.
-
The value of the dew point if the compressor includes a dryer.
The display also shows the value of all measured and set parameters.
Pictograms used on display (Tab. B)
Ref.
Pictogram
Description
1)
Compressor in loading mode.
2)
Compressor in unloading mode.
3)
Motor stopped.
4)
When the compressor is stopped, the icon is fixed. When the compressor is running, the
icon rotates.
5)
Screw compressor output temperature
6)
Dew point (version with dryer).
7)
Motor overload or incorrect phase connection, or overtemperature of screw compressor
detected by thermostats (TSHH11-12).
8)
Emergency stop command activated.
9)
Pictogram: service
10)
Remote Start/Stop
11)
LAN network setting.
12)
Automatic restart after voltage failure active.
13)
Timer
Main screen
When the board is powered, the main screen automatically appears showing the operating status of the compressor and the output pressure:
example:
The display shows that the compressor is working in loading mode and that the supply pressure is 6.8 bar.
Consult the after-sales service if the wording <test> appears.
