Chevrolet T-Series Owner'S Manual Download Page 251

Page: 251 / 326

Vehicle Care/Appearance Materials

Description

Usage

Polishing Cloth
Wax- Treated

Interior and exterior
polishing cloth.

Tar and Road
Oil Remover

Removes tar, road oil
and asphalt.

Chrome Cleaner
and Polish

Use on chrome or
stainless steel.

White Sidewall
Tire Cleaner

Removes soil and black
marks from whitewalls.

Vinyl Cleaner

Cleans vinyl.

Glass Cleaner

Removes dirt, grime,
smoke and fingerprints.

Chrome and Wire
Wheel Cleaner

Removes dirt and grime
from chrome wheels and
wire wheel covers.

Finish Enhancer

Removes dust,
fingerprints, and surface
contaminants. Spray on
wipe off.

Description

Usage

Swirl Remover Polish

Removes swirl marks, fine
scratches and other light
surface contamination.

Cleaner Wax

Removes light scratches
and protects finish.

Foaming Tire Shine Low
Gloss

Cleans, shines and
protects in one easy step,
no wiping necessary.

Wash Wax Concentrate

Medium foaming
shampoo. Cleans and
lightly waxes.
Biodegradable and
phosphate free.

Spot Lifter

Quickly and easily
removes spots and stains
from carpets, vinyl and
cloth upholstery.

Odor Eliminator

Odorless spray odor
eliminator used on fabrics,
vinyl, leather and carpet.

251

Summary of Contents for T-Series







































































































































































































































































































































Search results

Summary of Contents for T-Series

Reviews:

Brands by name

Popular brands

Chevrolet T-Series, Owner'S Manual

Search results

Summary of Contents for T-Series

Reviews:

Brands by name

Popular brands