Chevrolet Spark 2022 Owner'S Manual Download Page 150

Page: 150 / 200

Chevrolet Spark Owner Manual (GMK-Localizing-Israel-15672694) - 2022 -

CRC - 3/17/21

Vehicle Care

149

In left-hand drive vehicles, in the interior
behind the storage compartment, or, in
right-hand drive vehicles, behind the
glovebox

Before replacing a fuse, turn off the
respective switch and the ignition.

A blown fuse can be recognized by its
melted wire. Do not replace the fuse until
the cause of the fault has been remedied.

Some functions are protected by several
fuses.

Fuses may also be inserted without
existence of a function.

Fuse extractor

A fuse extractor may be located in the fuse
box in the engine compartment.

Place the fuse extractor on the various types
of fuse from the top or side, and
withdraw fuse.

Summary of Contents for Spark 2022









































































































































































































Search results

Summary of Contents for Spark 2022

Reviews:

Related manuals for Spark 2022

Brands by name

Popular brands

Chevrolet Spark 2022, Owner'S Manual

Search results

Summary of Contents for Spark 2022

Reviews:

Related manuals for Spark 2022

Brands by name

Popular brands