Chevrolet Spark 2022 Owner'S Manual Download Page 71

Page: 71 / 200

Chevrolet Spark Owner Manual (GMK-Localizing-Israel-15672694) - 2022 -

CRC - 3/17/21

Instruments and Controls

Clock

Time is shown on the infotainment display.

Adjust the settings for the time in the
settings menu.

Power Outlets

A 12 Volt power outlet is located in the
center console.

Do not exceed the maximum power
consumption of 120 watts.

With ignition off, the power outlet is
deactivated. Additionally the power outlet is
deactivated in the event of low vehicle
battery voltage.

Do not connect any current-delivering
accessories, e.g. electrical charging devices or
batteries.

Do not damage the outlet by using
unsuitable plugs.

Summary of Contents for Spark 2022









































































































































































































Search results

Summary of Contents for Spark 2022

Reviews:

Related manuals for Spark 2022

Brands by name

Popular brands

Chevrolet Spark 2022, Owner'S Manual

Search results

Summary of Contents for Spark 2022

Reviews:

Related manuals for Spark 2022

Brands by name

Popular brands