Chevrolet Spark 2022 Owner'S Manual Download Page 148

Page: 148 / 200

Chevrolet Spark Owner Manual (GMK-Localizing-Israel-15672694) - 2022 -

CRC - 3/17/21

Vehicle Care

147

4. Rotate bulb holder anti-clockwise.

5. Remove bulb holder. Push bulb into

socket slightly, rotate anti-clockwise,
remove and renew bulb.

6. Insert bulb holder into the tail light

assembly and screw into place.
Connect wiring plug. Install tail light
assembly in body and tighten screws.
Close covers and engage.

7. Switch on ignition, operate and check all

lights.

Side Turn Signal Lamps

To replace bulb, remove lamp housing:

1. Slide lamp to the front and remove it

out of the front wing with the rear end.

2. Turn bulb holder anticlockwise and

remove from housing.

3. Pull bulb from bulb holder and replace it.
4. Insert bulb holder and turn clockwise.

Summary of Contents for Spark 2022









































































































































































































Search results

Summary of Contents for Spark 2022

Reviews:

Related manuals for Spark 2022

Brands by name

Popular brands

Chevrolet Spark 2022, Owner'S Manual

Search results

Summary of Contents for Spark 2022

Reviews:

Related manuals for Spark 2022

Brands by name

Popular brands