Chevrolet Spark 2022 Owner'S Manual Download Page 145

Page: 145 / 200

Chevrolet Spark Owner Manual (GMK-Localizing-Israel-15672694) - 2022 -

CRC - 3/17/21

144

Vehicle Care

1. Sidemarker Lamp (LED)
2. Low-Beam Headlamp
3. High-Beam Headlamp/Parking Lamp

Low Beam

1. Remove the headlamp bulb cover by

rotating anticlockwise.

2. Unplug the connector from bulb.
3. Press the spring clip and disengage

the bulb.

4. Remove the bulb from the reflector

housing.

5. When fitting a new bulb, engage the

lugs in the recesses on the reflector and
press the spring clip into position.

6. Plug the connector onto bulb.
7. Place the protective cover in the right

position and close it.

8. Check lamp operation.

High Beam

1. Remove the headlamp bulb cover by

rotating anticlockwise.

2. Unplug the connector from bulb.

Summary of Contents for Spark 2022









































































































































































































Search results

Summary of Contents for Spark 2022

Reviews:

Related manuals for Spark 2022

Brands by name

Popular brands

Chevrolet Spark 2022, Owner'S Manual

Search results

Summary of Contents for Spark 2022

Reviews:

Related manuals for Spark 2022

Brands by name

Popular brands