Chevrolet Spark Owner Manual (GMK-Localizing-Israel-15672694) - 2022 -
CRC - 3/17/21
Infotainment System
101
.
Go back to the beginning of the
Phone menus on the infotainment
display and restart the pairing
process.
.
Reset the cell phone, but this step
should be done as a last-effort.
9. If the cell phone prompts to accept
connection or allow phone book
download, touch Always Accept and
Allow. The phone book may not be
available if not accepted.
10. Repeat Steps 1
−
8 to pair additional cell
phones.
First to Connect Paired Phones
If multiple paired cell phones are within the
range of the system, the system connects to
the paired cell phone that is set as First to
Connect. To enable a paired cell phone as
the First to Connect phone:
1. Make sure the cell phone is turned on.
2. Touch Settings, then touch System.
3. Touch Phones to access all paired and all
connected cell phones and mobile
devices.
4. Touch the information icon to the right
of the cell phone to open the cell
phone
’
s settings menu.
5. Touch the First to Connect option, to
enable the setting for that device.
Cell phones and mobile devices can be
added, removed, connected, and
disconnected. A sub-menu will display
whenever a request is made to add or
manage cell phones and mobile devices.
Secondary Phone
A phone can be enabled as a Secondary
Phone by touching the information icon to
the right of the paired phone name to open
the phone settings menu. If a phone is
enabled as a Secondary Phone, it can
connect simultaneously alongside another
Bluetooth mobile device. In doing so, the
Secondary Phone will be labeled as Incoming
Calls. This means the mobile device can only
receive calls. The Address Book of a
Secondary Phone will not be available and
hands-free outgoing calls cannot be placed
using this phone.
If needed, touch the Secondary Phone while
in the Phones list to swap it into the
Outgoing and Incoming role. This role makes
it possible to place outgoing calls from the
Contacts and Recents list.
Listing All Paired and Connected Phones
1. Touch the Phone icon on the Home Page
or the phone icon on the shortcut tray
near the bottom of the display.
2. Select Phones.
Disconnecting a Connected Phone
1. Touch the Phone icon on the Home Page.
2. Select Phones.
3. Touch the information icon next to the
connected cell phone or mobile device to
show the cell phone
’
s or mobile device
’
s
information display.
4. Touch Disconnect.
Deleting a Paired Phone
1. Touch the Phone icon on the Home Page
or the phone icon on the shortcut tray
near the bottom of the display.
2. Select Phones.
3. Touch the information icon next to the
connected cell phone to display the cell
phone
’
s or mobile device
’
s information
display.
4. Touch Forget Device.
