Securing a Child Restraint Designed
for the LATCH System
{
CAUTION:
If a LATCH-type child restraint is not
attached to anchors, the restraint will
not be able to protect the child correctly.
In a crash, the child could be seriously
injured or killed. Make sure that a
LATCH-type child restraint is properly
installed using the anchors, or use
the vehicle’s safety belts to secure the
restraint, following the instructions
that came with that restraint, and also
the instructions in this manual.
{
CAUTION:
Each top tether anchor, except the center
top tether anchor in an extended cab
model, and lower anchors in the vehicle
are designed to hold only one child
restraint. Attaching more than one child
restraint to a single anchor could cause
the anchor or attachment to come loose
or even break during a crash. A child or
others could be injured if this happens.
To help prevent injury to people and
damage to your vehicle, attach only
one child restraint per anchor.
62
Summary of Contents for Silverado Classic 2007
