Chevrolet Silverado Classic 2007, Owner'S Manual

Page: 13 / 676

To stop recall movement of the memory seat
feature at any time, press one of the memory
buttons or power seat controls.
Easy Exit Seat
The controls for this memory function are located
on the driver’s door.
B
(Easy Exit Seat): This button is used to
program and recall the desired driver’s seat
position when exiting or entering the vehicle.
The seat position can be saved for up to
two drivers.
To store the seat exit position, do the following:
1. If you have an automatic transmission,
place the vehicle in PARK (P).
If you have a manual transmission, set the
parking brake.
2. Press and release the 1 or 2 button. The seat
will move to the stored memory position.
3. Adjust the seat to the desired exit position.
4. Press and hold the exit button of the memory
control for three seconds. A double chime will
sound to let you know that the position has
been stored for the selected button 1 or 2.
To repeat the procedure for a second driver,
follow the preceding steps, but press the other
numbered memory control button.
To use the seat exit position, do one of the following:
•
If you have an automatic transmission, press
and release the exit button on the memory
control while the vehicle is in PARK (P).
•
If you have a manual transmission, press and
release the exit button on the memory control
while the parking brake is set.
•
If this feature is activated in the Driver
Information Center (DIC), removing the key
from the ignition will move the seat to the
exit position.
See “Easy Exit Seat” under DIC Vehicle
Customization on page 281 for more information
on activating this feature in the DIC.
13