Chevrolet Silverado Classic 2007, Owner'S Manual

Page: 19 / 676

To flip and fold the seat, do the following:
1. Pull up on the strap
loop at the rear of
the seat cushion.
Then, pull the
seat cushion up
and flip it forward.
Notice: Folding a rear seat with the safety
belts still fastened may cause damage to the
seat or the safety belts. Always unbuckle
the safety belts and return them to their normal
stowed position before folding a rear seat.
2. After folding the seat cushion fully forward,
pull the seatback forward until it is flat.
If the seatback cannot fold flat because it
interferes with the cushion, try moving
the front seat forward and/or bringing the
front seat more upright. The lever at the
base of the seat must be turned rearward
to release the seatback.
To return the seat to the normal seating position,
do the following:
1. Lift the seatback up and push it rearward
all the way.
{
CAUTION:
If the seatback is not locked, it could
move forward in a sudden stop or crash.
That could cause injury to the person
sitting there. Always push and pull on the
seatback to be sure it is locked.
2. Push and pull on the seatback to make sure
it is locked into place.
19