Chevrolet Silverado Classic 2007, Owner'S Manual

Page: 303 / 676

INFO (Information): Press this knob to see
how long the current track has been playing.
ET and the elapsed time appears on the display.
To change the default on the display, track
or elapsed time, press the knob until you see
the desired display, then hold the knob for
two seconds. The radio produces one beep
and the selected display is now the default.
BAND: Press this button to listen to the radio
when a CD is playing. The inactive CD remains
safely inside the radio for future listening.
CD AUX (Auxiliary): Press this button to play
a CD when listening to the radio. The inactive
CD remains safely inside the radio for future
listening.
Z
(Eject): Press this button to stop and eject
a CD when it is playing or to eject a CD when
it is not playing. Eject may be activated with either
the ignition or radio off. CDs may be loaded
with the radio and ignition off if this button is
pressed first.
CD Messages
If the CD comes out, it could be for one of the
following reasons:
•
It is very hot. When the temperature returns
to normal, the CD should play.
•
You are driving on a very rough road.
When the road becomes smoother,
the CD should play.
•
The CD is dirty, scratched, wet, or
upside down.
•
The air is very humid. If so, wait about
an hour and try again.
•
There may have been a problem while
burning the CD.
•
The label may be caught in the CD player.
If the CD is not playing correctly, for any other
reason, try a known good CD.
If any error occurs repeatedly or if an error
cannot be corrected, contact your dealer.
If the radio displays an error message, write
it down and provide it to your dealer when
reporting the problem.
303