manualshive.com logo in svg

Chevrolet Silverado 2020, Owner'S Manual

Share
Download
Chevrolet Silverado 2020 Owner'S Manual Download Page 184

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

13337620) - 2020 - CTC - 1/27/20

Driving and Operating

183

Lane Change Alert (LCA)

(1500 Series) . . . . . . . . . . . . . . . 270

Lane Departure Warning

(LDW) (2500/3500
Series) . . . . . . . . . . . . . . . . . . . . . . 272

Lane Keep Assist (LKA) (1500

Series) . . . . . . . . . . . . . . . . . . . . . . 274

Fuel

Top Tier Fuel . . . . . . . . . . . . . . . . . 276
Recommended Fuel (Except

6.2L V8 Engine) . . . . . . . . . . . . . 276

Recommended Fuel (6.2L

V8 Engine) . . . . . . . . . . . . . . . . . . 277

Prohibited Fuels . . . . . . . . . . . . . . 277
Fuels in Foreign Countries . . . 277
Fuel Additives . . . . . . . . . . . . . . . . 278
E85 or FlexFuel . . . . . . . . . . . . . . 278
Filling the Tank (Pickup

Model) . . . . . . . . . . . . . . . . . . . . . . 279

Filling the Tank (Chassis Cab

Model) . . . . . . . . . . . . . . . . . . . . . . 281

Filling a Portable Fuel

Container . . . . . . . . . . . . . . . . . . . 282

Trailer Towing

General Towing

Information . . . . . . . . . . . . . . . . . . 283

Driving Characteristics and

Towing Tips . . . . . . . . . . . . . . . . . 283

Trailer Towing . . . . . . . . . . . . . . . . 288

Towing Equipment . . . . . . . . . . . . 292
Trailer Sway Control (TSC) . . . 304
Trailering App . . . . . . . . . . . . . . . . 306

Conversions and Add-Ons

Add-On Electrical

Equipment . . . . . . . . . . . . . . . . . . 318

Adding a Snow Plow or Similar

Equipment . . . . . . . . . . . . . . . . . . 319

Pickup Conversion to

Chassis Cab . . . . . . . . . . . . . . . . 322

Driving Information

Driving for Better Fuel
Economy

Driving habits can affect fuel
mileage. Here are some driving tips
to get the best fuel economy
possible:

.

Set the climate controls to the
desired temperature after the
engine is started, or turn them
off when not required.

.

Avoid fast starts and accelerate
smoothly.

.

Brake gradually and avoid
abrupt stops.

.

Avoid idling the engine for long
periods of time.

.

When road and weather
conditions are appropriate, use
cruise control.

.

Always follow posted speed
limits or drive more slowly when
conditions require.

.

Keep vehicle tires properly
inflated.

Summary of Contents for Silverado 2020
















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands