Chevrolet Silverado 2020 Owner'S Manual Download Page 110

Page: 110 / 495

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

13337620) - 2020 - CTC - 1/27/20

Seats and Restraints

109

If a child restraint has been installed
and the ON indicator is lit, see

“

the On Indicator Is Lit for a Child
Restraint

”

under

Passenger Sensing

System

To remove the child restraint,
unbuckle the vehicle seat belt and
let it return to the stowed position.

Summary of Contents for Silverado 2020
















































































































































































































































































































































































































































































































Search results

Summary of Contents for Silverado 2020

Reviews:

Brands by name

Popular brands

Chevrolet Silverado 2020, Owner'S Manual

Search results

Summary of Contents for Silverado 2020

Reviews:

Brands by name

Popular brands