Chevrolet 2011 Cruze Owner'S Manual Download Page 341

Page: 341 / 394

Black plate (89,1)

Chevrolet Cruze Owner Manual - 2011

Vehicle Care

10-89

Notice:

Towing the vehicle from

the rear could damage it. Also,
repairs would not be covered by
the vehicle warranty. Never have
the vehicle towed from the rear.

Dolly Towing

Tow the vehicle with the two rear
wheels on the ground and the front
wheels on a dolly:

To tow the vehicle with two wheels
on the ground and a dolly:

1. Put the front wheels on a dolly.

2. Shift the automatic transmission

into P (Park) or a manual
transmission into first gear.

3. Set the parking brake.

4. Clamp the steering wheel in a

straight-ahead position with a
clamping device designed for
towing.

5. Remove the key from the

ignition.

6. Secure the vehicle to the dolly.

7. Release the parking brake.

Notice:

Towing the vehicle from

the rear could damage it. Also,
repairs would not be covered by
the vehicle warranty. Never have
the vehicle towed from the rear.

Summary of Contents for 2011 Cruze











































































































































































































































































































































































































Search results

Summary of Contents for 2011 Cruze

Reviews:

Related manuals for 2011 Cruze

Brands by name

Popular brands

Chevrolet 2011 Cruze, Owner'S Manual

Search results

Summary of Contents for 2011 Cruze

Reviews:

Related manuals for 2011 Cruze

Brands by name

Popular brands