Chevrolet 2011 Cruze Owner'S Manual Download Page 112

Page: 112 / 394

Black plate (2,1)

Chevrolet Cruze Owner Manual - 2011

4-2

Storage

Center Console Storage

The center console storage has a
tray and a main storage area. Pull
up on the latch (A) to access.

Pull up on the latch and slide the
center console armrest to adjust the
position. Return the armrest to the
rear position to access the
storage area.

There may be an auxiliary jack
outlet and a USB port located in the
center console.

See

Auxiliary Devices on page 7

‑

Additional Storage
Features

Cargo Tie Downs

On the driver side in the rear
compartment is a retainer to hang
light items on.

Summary of Contents for 2011 Cruze











































































































































































































































































































































































































Search results

Summary of Contents for 2011 Cruze

Reviews:

Related manuals for 2011 Cruze

Brands by name

Popular brands

Chevrolet 2011 Cruze, Owner'S Manual

Search results

Summary of Contents for 2011 Cruze

Reviews:

Related manuals for 2011 Cruze

Brands by name

Popular brands