Chevrolet 2011 Cruze Owner'S Manual Download Page 174 | Manualshive

Page: 174 / 394

background image

Black plate (16,1)

Chevrolet Cruze Owner Manual - 2011

7-16

Infotainment System

Channel Unauth:

This channel is

blocked or cannot be received with
your XM Subscription package.

Channel Unavailable:

This

previously assigned channel is no
longer assigned. Tune to another
station.

No Artist Info:

The system is

working properly. No artist
information is available at this time
on this channel.

No Title Info:

The system is

working properly. No song title
information is available at this time
on this channel.

No CAT Info:

The system is

working properly. No category
information is available at this time
on this channel.

No Information:

The system is

working properly. No text or
informational messages are
available at this time on this
channel.

No Subscription Please Renew:

XM subscription needs to be
reactivated. Contact XM at
www.xmradio.com or call
1-800-929-2100 in the U.S. and
www.xmradio.ca or call
1-877-438-9677 in Canada.

No XM Signal:

The system is

working properly. The vehicle may
be in a location where the XM signal
is being blocked. When the vehicle
is moved into an open area, the
signal should return.

CAT Not Found:

The system is

working properly. There are no
channels available for the selected
category.

XM Radio ID:

If tuned to channel 0,

this message alternates with the XM
Radio 8

‐

digit radio ID label. This

label is needed to activate the
service.

Unknown:

If this message is

received when tuned to channel 0,
there could be a receiver fault.
Consult with your dealer.

Check Antenna:

If this message

does not clear within a short period
of time, the receiver could have a
fault. Consult with your dealer.

XM Not Available:

If this message

does not clear within a short period
of time, the receiver could have a
fault. Consult with your dealer.

Radio Reception

Frequency interference and static
can occur during normal radio
reception if items such as cell phone
chargers, vehicle convenience
accessories, and external electronic
devices are plugged into the
accessory power outlet. If there is
interference or static, unplug the
item from the accessory power
outlet.

«
...
172
173
174
175
176
...
»

Summary of Contents for 2011 Cruze











































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2011 Cruze

Brand: Hama Pages: 2

Brand: RAM Commercial Pages: 12

Reference Series

Brand: OEM Audio Pages: 29

Brand: Compass Pages: 16

Brand: Globalsat Pages: 2

Brand: Audiovox Pages: 24

Brand: Mercedes-Benz Pages: 2

Brand: Westin Pages: 2

Brand: Hyundai Pages: 11

Park Vision VAL632210

Brand: Valeo Pages: 25

Brand: INDIWORK Pages: 18

Brand: Opel Pages: 103

Brand: Skoda Pages: 2

Brand: Mercedes-Benz Pages: 10

Brand: Mopar Pages: 18

Brand: TomTom Pages: 22

Brand: Ford Pages: 51

spectroFlex Car Adapter

Brand: wtw Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands