Chevrolet 2011 Cruze, Owner'S Manual

Page: 187 / 394

Black plate (29,1)
Chevrolet Cruze Owner Manual - 2011
Infotainment System 7-29
5. Locate the device named “ Your
Vehicle ” in the list on the cell
phone. Follow the instructions
on the cell phone to enter the
PIN that was provided in Step 3.
After the PIN is successfully
entered, the system prompts you
to provide a name for the paired
cell phone. This name will be
used to indicate which phones
are paired and connected to the
vehicle. See
“ Listing All Paired
and Connected Phones ” later in
this section for more information.
6. Repeat Steps 1 through 5 to pair
additional phones.
Listing All Paired and Connected
Phones
The system can list all cell phones
paired to it. If a paired cell phone is
also connected to the vehicle, the
system responds with
“ is connected ”
after that phone name.
1. Press
b g
. For vehicles with a
navigation system, say “ Hands
Free, ” after the tone.
2. Say “ Bluetooth. ”
3. Say “ List. ”
Deleting a Paired Phone
If the phone name you want to
delete is unknown, see
“ Listing All
Paired and Connected Phones. ”
1. Press
b g
. For vehicles with a
navigation system, say “ Hands
Free, ” after the tone.
2. Say “ Bluetooth. ”
3. Say “ Delete. ”
4. Say the name of the phone you
want to delete.
Connecting to a Different Phone
To connect to a different cell phone,
the Bluetooth system looks for the
next available cell phone in the
order in which all the available cell
phones were paired. Depending on
which cell phone you want to
connect to, you may have to use
this command several times.
1. Press
b g
. For vehicles with a
navigation system, say “ Hands
Free, ” after the tone.
2. Say “ Bluetooth. ”
3. Say “ Change phone. ”
. If another cell phone is
found, the response will be
“ <Phone name> is now
connected. ”
. If another cell phone is not
found, the original phone
remains connected.