Chevrolet 2008 Cobalt Owner'S Manual Download Page 24 | Manualshive

Page: 24 / 402

background image

Q:

What is wrong with this?

A:

The shoulder belt is worn under the arm. It should
be worn over the shoulder at all times.

{

CAUTION:

You can be seriously injured if you wear the
shoulder belt under your arm. In a crash, your
body would move too far forward, which would
increase the chance of head and neck injury.
Also, the belt would apply too much force to
the ribs, which are not as strong as shoulder
bones. You could also severely injure internal
organs like your liver or spleen. The shoulder
belt should go over the shoulder and across
the chest.

1-20

«
...
22
23
24
25
26
...
»

Summary of Contents for 2008 Cobalt



















































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 Cobalt

Brand: PAC Pages: 15

Brand: Eclipse Pages: 6

Electronic Parking Disc II

Brand: Jacob Jensen Pages: 28

Brand: Kargo Master Pages: 13

Brand: Kargo Master Pages: 21

Brand: Kargo Master Pages: 4

Brand: Jackco Pages: 11

Brand: Bestop Pages: 11

Brand: Whispbar Pages: 14

2014 Insignia VXR SuperSport

Brand: Vauxhall Pages: 56

Brand: Tessera4x4 Pages: 20

Brand: PAC Pages: 4

Brand: P-Invent Pages: 4

Dunlop L.D02.C.M

Brand: Sumitomo Pages: 22

OUTLANDER PHEV 2022

Brand: Mitsubishi MOTORS Pages: 8

Brand: Whispbar Pages: 14

Brand: Mitsubishi Pages: 57

Brand: ULTIMATE SPEED Pages: 132

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands