Chevrolet 2008 Cobalt Owner'S Manual Download Page 27 | Manualshive

Page: 27 / 402

background image

Lap-Shoulder Belt

All seating positions in your vehicle have a
lap-shoulder belt.

Here is how to wear a lap-shoulder belt properly.

1. If your seat has a safety belt guide, and the safety

belt is not routed through the guide, slide the edge
of the belt webbing through the opening on the
guide. Be sure the belt is not twisted.

2. Adjust the seat, if the seat is adjustable, so you can

sit up straight. To see how, see “Seats” in the
Index.

3. Pick up the latch plate and pull the belt across you.

Do not let it get twisted.

The lap-shoulder belt may lock if you pull the belt
across you very quickly. If this happens, let the belt
go back slightly to unlock it. Then pull the belt
across you more slowly.

Engaging the child restraint locking feature
may affect the passenger sensing system.
See Passenger Sensing System on page 1-61.

1-23

«
...
25
26
27
28
29
...
»

Summary of Contents for 2008 Cobalt



















































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 Cobalt

Brand: A-Tach Mounts Pages: 2

Brand: A-Tach Mounts Pages: 2

Brand: A-Tach Mounts Pages: 2

Brand: Lancia Pages: 386

Prestige APS-45B

Brand: Audiovox Pages: 8

Brand: Volvo Pages: 138

2012 Escalade Hybrid

Brand: Cadillac Pages: 90

Brand: Mercedes-Benz Pages: 30

Brand: Vintage Air Pages: 28

Brand: Chevrolet Pages: 376

Brand: Mazda Pages: 15

Brand: B-Speech Pages: 4

51 47 0 027 792

Brand: BMW Pages: 7

Brand: Ford Pages: 728

Brand: Westin Pages: 5

Brand: NavInc Pages: 6

Denali 1094-0185-15

Brand: E&G Classics Pages: 3

Brand: Metra Electronics Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands