manualshive.com logo in svg

Chevrolet 2008 Cobalt, Owner'S Manual

The Chevrolet 2008 Cobalt User Manual is a comprehensive guide designed to help owners understand and operate their vehicle efficiently. Discover essential information about maintenance, safety features, and troubleshooting. Download this free manual from manualshive.com to enhance your driving experience and ensure optimal performance of your Cobalt.

Share
Download
background image

Shifting Out of PARK (P)
(Automatic Transmission)

This vehicle is equipped with an electronic shift lock
release system. The shift lock release is designed to:

•

Prevent ignition key removal unless the shift
lever is in PARK (P) with the shift lever button
fully released, and

•

Prevent movement of the shift lever out of
PARK (P) unless the ignition is in ON/RUN or
ACC/ACCESSORY and the regular brake pedal
is applied.

The shift lock release is always functional except in the
case of a an uncharged or low voltage (less than 9 volt)
battery.

If your vehicle has an uncharged battery or a battery
with low voltage, try charging or jump starting the
battery. See Jump Starting on page 5-34 for more
information.

To shift out of PARK (P):

1. Apply the brake pedal.

2. Then press the shift lever button.

3. Move the shift lever to the desired position.

If you still are unable to shift out of PARK (P):

1. Fully release the shift lever button.

2. While holding down the brake pedal, press the

shift lever button again.

3. Move the shift lever to the desired position.

If you still cannot move the shift lever from PARK (P),
consult your dealer/retailer or a professional towing
service.

Parking Your Vehicle

Before leaving your vehicle, fully press the clutch pedal
down, move the shift lever into REVERSE (R), and
firmly apply the parking brake. Once the shift lever has
been placed in REVERSE (R) with the clutch pedal
pressed down, you can turn the ignition key to OFF/
LOCK, remove the key and release the clutch pedal.
See Manual Transmission Operation on page 2-30.

2-35

Summary of Contents for 2008 Cobalt



















































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 Cobalt

Jacob Jensen Electronic Parking Disc II User Manual preview
Electronic Parking Disc II
Brand: Jacob Jensen Pages: 28
Jeep Wrangler 2011 Owner'S Manual preview
Wrangler 2011
Brand: Jeep Pages: 603
Jeep Patriot 2011 User Manual preview
Patriot 2011
Brand: Jeep Pages: 80
OEM Audio Reference Series Manual preview
Reference Series
Brand: OEM Audio Pages: 29
Mobis G4211ADE00AL Installation Instructions Manual preview
G4211ADE00AL
Brand: Mobis Pages: 16
Subaru starlink Manual preview
starlink
Brand: Subaru Pages: 216
Wagan 2227-1 User Manual preview
2227-1
Brand: Wagan Pages: 8
Thermo King T- series Driver Manual To Simple Operation preview
T- series
Brand: Thermo King Pages: 2
GMC SIERRA 2002 Manual preview
SIERRA 2002
Brand: GMC Pages: 499
Kia Amanti Owner'S Manual preview
Amanti
Brand: Kia Pages: 290
Pyle PLCMRV8B Black User Manual preview
PLCMRV8B Black
Brand: Pyle Pages: 4
Yakima K674 Instructions Manual preview
K674
Brand: Yakima Pages: 13
Menabo 000081000000, Fitting Instructions Manual preview
000081000000,
Brand: Menabo Pages: 11
Honda 2011 Civic Sedan Vehicle Instruction Card preview
2011 Civic Sedan
Brand: Honda Pages: 5
Suzuki 990E0-54P56-000 Installers And Users Instructions preview
990E0-54P56-000
Brand: Suzuki Pages: 12
Actia SmarTach Manual preview
SmarTach
Brand: Actia Pages: 102
Honda 2010 Civic Sedan Owner'S Manual preview
2010 Civic Sedan
Brand: Honda Pages: 390
Jeep PATRIOT 2013 Manual preview
PATRIOT 2013
Brand: Jeep Pages: 16

Brands by name

Popular brands

Load more brands