Chevrolet 2008 Cobalt Owner'S Manual Download Page 9

Page: 9 / 402

Your seats have manual reclining seatbacks. The lever
used to operate them is located on the outboard side
of the seats.

To recline the seatback, do the following:

1. Lift the recline lever.

2. Move the seatback to the desired position, then

release the lever to lock the seatback in place.

3. Push and pull on the seatback to make sure it

is locked.

To return the seatback to an upright position, do the
following:

1. Lift the lever fully without applying pressure to the

seatback and the seatback will return to the upright
position.

2. Push and pull on the seatback to make sure it

is locked.

1-5

Summary of Contents for 2008 Cobalt



















































































































































































































































































































































































































Search results

Summary of Contents for 2008 Cobalt

Reviews:

Related manuals for 2008 Cobalt

Brands by name

Popular brands

Chevrolet 2008 Cobalt, Owner'S Manual

Search results

Summary of Contents for 2008 Cobalt

Reviews:

Related manuals for 2008 Cobalt

Brands by name

Popular brands