Chevrolet 2008 Avalanche Owner'S Manual Download | Manualshive

Page: 252 / 528

background image

PARK TILT MIRRORS

If your vehicle has this feature, it allows you to select
whether or not the outside mirror(s) will automatically tilt
down when the vehicle is shifted into REVERSE (R).
See

Outside Power Foldaway Mirrors on page 2-56

for

more information.

Press the customization button until PARK TILT
MIRRORS appears on the DIC display. Press the
set/reset button once to access the settings for
this feature. Then press the customization button
to scroll through the following settings:

OFF (default):

Neither outside mirror will be tilted down

when the vehicle is shifted into REVERSE (R).

DRIVER MIRROR:

The driver’s outside mirror

will be tilted down when the vehicle is shifted into
REVERSE (R).

PASSENGER MIRROR:

The passenger’s outside

mirror will be tilted down when the vehicle is shifted into
REVERSE (R).

BOTH MIRRORS:

The driver’s and passenger’s outside

mirrors will be tilted down when the vehicle is shifted
into REVERSE (R).

NO CHANGE:

No change will be made to this feature.

The current setting will remain.

To select a setting, press the set/reset button while the
desired setting is displayed on the DIC.

EASY EXIT SEAT

If your vehicle has this feature, it allows you to select
your preference for the automatic easy exit seat feature.
See

Memory Seat, Mirrors, and Pedals on page 1-6

for more information.

Press the customization button until EASY EXIT SEAT
appears on the DIC display. Press the set/reset button
once to access the settings for this feature. Then press
the customization button to scroll through the following
settings:

OFF (default):

No automatic seat exit recall will occur.

ON:

The driver’s seat will move back when the key

is removed from the ignition.

The automatic easy exit seat movement will only occur
one time after the key is removed from the ignition. If the
automatic movement has already occurred, and you put
the key back in the ignition and remove it again, the seat
will stay in the original exit position, unless a memory
recall took place prior to removing the key again.

NO CHANGE:

No change will be made to this feature.

The current setting will remain.

To select a setting, press the set/reset button while the
desired setting is displayed on the DIC.

3-72

«
...
250
251
252
253
254
...
»

Summary of Contents for 2008 Avalanche

















































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 Avalanche

witty park XEV6 Series

Brand: hager Pages: 9

Brand: Chevrolet Pages: 2

Brand: Dodge Pages: 24

Brand: Mazda Pages: 122

Brand: Opel Pages: 32

Brand: Saturn Pages: 440

Brand: Curtis Pages: 6

K40 Platinum360

Brand: K40 ELECTRONICS Pages: 11

Brand: Saab Pages: 288

Brand: Whispbar Pages: 14

Brand: Lund Pages: 12

Brand: TracRac Pages: 6

Brand: Skoda Pages: 276

Brand: Audi Pages: 9

Brand: Mazda Pages: 196

Brand: Skoda Pages: 288

Brand: Saab Pages: 498

Brand: VER-MAC Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands