manualshive.com logo in svg

Chevrolet 2008 Avalanche, Owner'S Manual

The Chevrolet 2008 Avalanche is a versatile and rugged truck that combines the best features of an SUV with a pickup truck. Explore its impressive Specifications and discover its full potential by downloading the user manual for free from our website.

Share
Download
background image

Turn and Lane-Change Signals

The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow you
to signal a turn or a lane change.

To signal a turn, move the lever all the way up or
down. When the turn is finished, the lever will return
automatically.

To signal a lane change, raise or lower the lever for
less than one second until the arrow starts to flash.
This will cause the turn signals to automatically
flash three times. It will flash six times if the tow-haul
mode is active. Holding the turn signal lever for
more than one second will cause the turn signals to
flash until you release the lever. The lever will return
by itself when it is released.

An arrow on the instrument
panel cluster will flash
in the direction of the
turn or lane change.

As you signal a turn or a lane change, if the arrows
flash more quickly than normal, a signal bulb may
be burned out and other drivers will not see your
turn signal.

If a bulb is burned out, replace it to help avoid an
accident. If the arrows do not go on at all when you
signal a turn, check for burned-out bulbs and a blown
fuse. See

Instrument Panel Fuse Block on page 5-109

and

Underhood Fuse Block on page 5-111

.

Turn Signal On Chime

If your turn signal is left on for more than 3/4 of a mile
(1.2 km), a chime will sound at each flash of the turn
signal and the message TURN SIGNAL ON will also
appear in the DIC. See

DIC Warnings and Messages

on page 3-59

. To turn the chime and message off, move

the turn signal lever to the off position.

3-8

Summary of Contents for 2008 Avalanche

















































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 Avalanche

U.S. General 97845 Set Up And Operating Instructions preview
97845
Brand: U.S. General Pages: 5
Ford F-150 2018 Quick Reference Manual preview
F-150 2018
Brand: Ford Pages: 12
DEFA 412737 Fitting Instructions Manual preview
412737
Brand: DEFA Pages: 7
Prorack K869 Fitting Instructions Manual preview
K869
Brand: Prorack Pages: 15
Ford E-Transit 2022 Manual preview
E-Transit 2022
Brand: Ford Pages: 22
Saab 32 025 888 Installation Instructions preview
32 025 888
Brand: Saab Pages: 3
WABCO TP2205 Installation Manual preview
TP2205
Brand: WABCO Pages: 48
EUFAB 11556 Operating Instructions Manual preview
11556
Brand: EUFAB Pages: 52
I.D. Systems Vehicle Asset Communicator User Manual preview
Vehicle Asset Communicator
Brand: I.D. Systems Pages: 41
THIEYE CarView 2 User Manual preview
CarView 2
Brand: THIEYE Pages: 88
National Cycle Quantum Wash'n'Wipe N30208 Assembly Instructions And Owner'S Manual preview
Quantum Wash'n'Wipe N30208
Brand: National Cycle Pages: 12
Hummer HX-T Owner'S Manual preview
HX-T
Brand: Hummer Pages: 31
Safe Fleet PRIME DESIGN VCR-TC11B Assembly Instructions Manual preview
PRIME DESIGN VCR-TC11B
Brand: Safe Fleet Pages: 12
v.link VL2-DVD900 Manual preview
VL2-DVD900
Brand: v.link Pages: 19
Edelbrock Honda XR400 Instruction Supplement preview
Honda XR400
Brand: Edelbrock Pages: 2
Hudson Super Six 1916 Reference Book preview
Super Six 1916
Brand: Hudson Pages: 77
Ford transit connect 2012 User Manual preview
transit connect 2012
Brand: Ford Pages: 299
Kolpin 1466 Product Instructions preview
1466
Brand: Kolpin Pages: 6

Brands by name

Popular brands

Load more brands