Chevrolet 2008 Avalanche Owner'S Manual Download | Manualshive

Page: 286 / 528

background image

XM Radio Messages

XL (Explicit Language Channels):

These channels,

or any others, can be blocked at a customer’s request,
by calling 1-800-852-XMXM (9696).

XM Updating:

The encryption code in the receiver is

being updated, and no action is required. This process
should take no longer than 30 seconds.

No XM Signal:

The system is functioning correctly, but

the vehicle is in a location that is blocking the XM™
signal. When you move into an open area, the signal
should return.

Loading XM:

The audio system is acquiring and

processing audio and text data. No action is needed.
This message should disappear shortly.

Channel Off Air:

This channel is not currently in

service. Tune to another channel.

Channel Unavail:

This previously assigned channel is

no longer assigned. Tune to another station. If this
station was one of the presets, choose another station
for that preset button.

No Artist Info:

No artist information is available at this

time on this channel. The system is working properly.

No Title Info:

No song title information is available

at this time on this channel. The system is working
properly.

No CAT Info:

No category information is available at

this time on this channel. The system is working
properly.

No Information:

No text or informational messages are

available at this time on this channel. The system is
working properly.

CAT Not Found:

There are no channels available for

the selected category. The system is working properly.

XM TheftLocked:

The XM receiver in the vehicle

could have previously been in another vehicle. For
security purposes, XM receivers cannot be swapped
between vehicles. If this message appears after having
your vehicle serviced, check with your dealer/retailer.

XM Radio ID:

If tuned to channel 0, this message

alternates with the XM Radio eight digit radio ID label.
This label is needed to activate the service.

Unknown:

If this message is received when tuned to

channel 0, there could be a receiver fault. Consult
with your dealer/retailer.

Check XM Receivr:

If this message does not clear

within a short period of time, the receiver could have a
fault. Consult with your dealer/retailer.

XM Not Available:

If this message does not clear

within a short period of time, the receiver could have a
fault. Consult with your dealer/retailer.

3-106

«
...
284
285
286
287
288
...
»

Summary of Contents for 2008 Avalanche

















































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 Avalanche

Brand: cam Pages: 2

Brand: Dapper Lighting Pages: 2

MARTEN-FREE CAR

Brand: Gardigo Pages: 36

Brand: Jeep Pages: 12

Brand: Jeep Pages: 6

Transit Vancouver Wagon

Brand: Webasto Pages: 44

Brand: V8 equipment Pages: 17

Brand: Porsche Pages: 313

Brand: Voxoa Pages: 48

Brand: Skoda Pages: 281

Brand: Beper Pages: 52

Hatch-bag Luggage System

Brand: Tabernus Peram Pages: 10

Brand: Whispbar Pages: 63

Brand: GROM Audio Pages: 20

Brand: BabySafe Pages: 43

Brand: E-Lead Pages: 11

Brand: Mercedes-Benz Pages: 284

Dual Clamp Spare Tire Mount

Brand: FACTORY UTV Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands