manualshive.com logo in svg

Chevrolet 2008 Avalanche, Owner'S Manual

The Chevrolet 2008 Avalanche is a versatile and rugged truck that combines the best features of an SUV with a pickup truck. Explore its impressive Specifications and discover its full potential by downloading the user manual for free from our website.

Share
Download
background image

DRIVER DOOR OPEN

This message displays and a chime sounds if the driver
door is not fully closed and the vehicle is in a drive
gear. Stop and turn off the vehicle, check the door
for obstructions, and close the door again. Check
to see if the message still appears on the DIC.

ENGINE HOT A/C (Air Conditioning)
TURNED OFF

This message displays when the engine coolant
becomes hotter than the normal operating temperature.
See

Engine Coolant Temperature Gage on page 3-42

.

To avoid added strain on a hot engine, the air
conditioning compressor automatically turns off.
When the coolant temperature returns to normal,
the air conditioning compressor turns back on.
You can continue to drive your vehicle.

If this message continues to appear, have the system
repaired by your dealer/retailer as soon as possible
to avoid damage to the engine.

ENGINE OVERHEATED IDLE ENGINE

Notice:

If you drive your vehicle while the engine

is overheating, severe engine damage may occur.
If an overheat warning appears on the instrument
panel cluster and/or DIC, stop the vehicle as soon
as possible. See

Engine Overheating on page 5-28

for more information.

This message displays when the engine coolant
temperature is too hot. Stop and allow the vehicle to idle
until it cools down. See

Engine Coolant Temperature

Gage on page 3-42

.

See

Overheated Engine Protection Operating Mode on

page 5-30

for information on driving to a safe place

in an emergency.

ENGINE OVERHEATED STOP ENGINE

Notice:

If you drive your vehicle while the engine

is overheating, severe engine damage may occur.
If an overheat warning appears on the instrument
panel cluster and/or DIC, stop the vehicle as soon as
possible. See

Engine Overheating on page 5-28

for more information.

This message displays and a chime sounds if the
engine cooling system reaches unsafe temperatures for
operation. Stop and turn off the vehicle as soon as it
is safe to do so to avoid severe damage. This message
clears when the engine has cooled to a safe operating
temperature.

3-60

Summary of Contents for 2008 Avalanche

















































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 Avalanche

Kia 2011 optima Owner'S Manual preview
2011 optima
Brand: Kia Pages: 385
Alpine eX-10 Owner'S Manual preview
eX-10
Brand: Alpine Pages: 69
Allen Sports S302 Instructions preview
S302
Brand: Allen Sports Pages: 2
Kia Picanto 2015 Quick Reference Manual preview
Picanto 2015
Brand: Kia Pages: 10
Weltmann KFZ-Teile 9B500016 Fitting Instructions Manual preview
9B500016
Brand: Weltmann KFZ-Teile Pages: 12
Linear Logic scangauge2 Quick Start Manual preview
scangauge2
Brand: Linear Logic Pages: 8
BMW M3 SEDAN Owner'S Manual preview
M3 SEDAN
Brand: BMW Pages: 392
Curt Manufacturing 13434 Installation Instructions preview
13434
Brand: Curt Manufacturing Pages: 4
Porsche 928 GTS 1994 Owner'S Manual preview
928 GTS 1994
Brand: Porsche Pages: 127
Poison Spyder TrailGate TJ Installation Instructions preview
TrailGate TJ
Brand: Poison Spyder Pages: 5
Kargo Master 40983 Quick Start Manual preview
40983
Brand: Kargo Master Pages: 18
SkyRack SR-CB-101 Assembly And Instruction Sheet preview
SR-CB-101
Brand: SkyRack Pages: 2
Kuda 050130 Installation Instruction preview
050130
Brand: Kuda Pages: 4
Fortin EVO ONE THAR-GM7 Installation Instructions Manual preview
EVO ONE THAR-GM7
Brand: Fortin Pages: 11
Ericsson M-RK 344A4616P1 Installation & Operator'S Manual preview
M-RK 344A4616P1
Brand: Ericsson Pages: 28
Hyundai C2017 ADU01 Manual preview
C2017 ADU01
Brand: Hyundai Pages: 7
HaWeKo MBK400 Installation Manual preview
MBK400
Brand: HaWeKo Pages: 2
Rand McNally tnd 760 User Manual preview
tnd 760
Brand: Rand McNally Pages: 60

Brands by name

Popular brands

Load more brands