Chevrolet 2008 Avalanche Owner'S Manual Download | Manualshive

Page: 138 / 528

background image

Outside Power Foldaway Mirrors

If your vehicle is equipped
with outside power
foldaway mirrors, the
controls are located on
the driver’s door armrest.

•

Press (A) to select the driver’s side mirror. Then
press the arrows located on the four-way control pad
to adjust the mirror. Press (A) again to deselect the
mirror.

•

Press (B) to select the passenger’s side mirror. Then
press the arrows located on the four-way control pad
to adjust the mirror. Press (B) again to deselect the
mirror.

•

Press (C) to fold the mirrors out to the driving
position.

•

Press (D) to fold the mirrors in to the folded position.

If the mirrors are accidentally folded/unfolded manually,
they may shake or flutter at normal driving speeds
and may not stay in the unfolded position. If this
happens, you will need to reset the mirrors. See
“Resetting the Power Foldaway Mirrors” next.

Resetting the Power Foldaway Mirrors

You will need to reset the power foldaway mirrors if the
following occurs:

•

The mirrors are accidentally obstructed while
folding.

•

They are accidentally manually folded/unfolded.

•

The mirrors will not stay in the unfolded position.

•

The mirrors shake and flutter at normal driving
speeds.

To reset the power foldaway mirrors, fold and unfold
them one time using the mirror controls. This will reset
them to their normal position.

This mirror has the following features.

Automatic Dimming

The driver’s outside mirror will adjust for the glare of
the headlamps behind you. See

Automatic Dimming

Rearview Mirror with OnStar

, Compass and

Temperature Display on page 2-49

.

2-56

«
...
136
137
138
139
140
...
»

Summary of Contents for 2008 Avalanche

















































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 Avalanche

Brand: Warrior Winches Pages: 17

Brand: Xblitz Pages: 16

1973 Convertible

Brand: Volkswagen Pages: 80

Brand: Saab Pages: 3

Brand: Parkeon Pages: 43

Challenger 2013

Brand: Dodge Pages: 543

Brand: C-KO Pages: 4

Brand: RHOX Pages: 8

Brand: PUTCO Pages: 2

Brand: Linear Logic Pages: 8

Brand: Reliant Pages: 206

Brand: Summit Racing Pages: 11

Brand: Honda Pages: 253

Brand: Toyota Pages: 11

Brand: Menabo Pages: 8

Brand: Roadefend Pages: 15

Brand: Metra Electronics Pages: 17

Brand: Rhino-Rack Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands