Chevrolet 2007 Colorado Page 433 Owner'S Manual Download

Page: 433 / 500

Vehicle Care/Appearance Materials

Description

Usage

Polishing Cloth
Wax-Treated

Interior and exterior
polishing cloth.

Tar and Road Oil
Remover

Removes tar, road oil,
and asphalt.

Chrome Cleaner
and Polish

Use on chrome or
stainless steel.

White Sidewall
Tire Cleaner

Removes soil and black
marks from whitewalls.

Vinyl Cleaner

Cleans vinyl.

Glass Cleaner

Removes dirt, grime,
smoke and fingerprints.

Chrome and Wire
Wheel Cleaner

Removes dirt and grime
from chrome wheels and
wire wheel covers.

Finish Enhancer

Removes dust,
fingerprints, and surface
contaminants. Spray on
and wipe off.

Description

Usage

Swirl Remover Polish

Removes swirl marks, fine
scratches, and other light
surface contamination.

Cleaner Wax

Removes light scratches
and protects finish.

Foaming Tire Shine
Low Gloss

Cleans, shines, and
protects in one step.
No wiping necessary.

Wash Wax Concentrate

Medium foaming
shampoo. Cleans
and lightly waxes.
Biodegradable and
phosphate free.

Spot Lifter

Quickly removes
spots and stains from
carpets, vinyl, and
cloth upholstery.

Odor Eliminator

Odorless spray odor
eliminator used on fabrics,
vinyl, leather and carpet.

433

Summary of Contents for 2007 Colorado





















































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Colorado

Reviews:

Related manuals for 2007 Colorado

Brands by name

Popular brands

Chevrolet 2007 Colorado, Owner'S Manual

Search results

Summary of Contents for 2007 Colorado

Reviews:

Related manuals for 2007 Colorado

Brands by name

Popular brands