Chevrolet 2007 Colorado Page 233 Owner'S Manual Download | Manualshive

Page: 233 / 500

background image

To delete tracks from the song list, perform the
following steps:

1. Turn the CD player on.

2. Press the SONG LIST button to turn song list

on. S-LIST appears on the display.

3. Press either SEEK or TYPE arrow to select

the desired track to be deleted.

4. Press and hold the SONG LIST button for

two seconds. When SONG LIST is pressed,
one beep will sound. After two seconds
of continuously pressing the SONG LIST
button, two beeps will sound to confirm that
the track has been deleted.

After a track has been deleted, the remaining
tracks are moved up the list. When another track
is added to the song list, the track is added to
the end of the list.

To delete the entire song list, perform the following
steps:

1. Turn the CD player on.

2. Press the SONG LIST button to turn song list

on. S-LIST appears on the display.

3. Press and hold the SONG LIST button for more

than four seconds. One beep will sound,
followed by two beeps after two seconds, and a
final beep will sound after four seconds. S-LIST
EMPTY appears on the display indicating the
song list has been deleted.

If a CD is ejected, and the song list contains
saved tracks from that CD, those tracks are
automatically deleted from the song list. Any tracks
saved to the song list again are added to the
bottom of the list.

To end song list mode, press the SONG LIST
button. One beep will sound and S-LIST is
removed from the display.

233

«
...
231
232
233
234
235
...
»

Summary of Contents for 2007 Colorado





















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2007 Colorado

Brand: Prorack Pages: 14

Brand: TATA Motors Pages: 308

MagicSafe MSG150

Brand: Waeco Pages: 20

Brand: Magneti Marelli Pages: 9

Brand: Carbest Pages: 64

Brand: Honda Pages: 2

Brand: Chevrolet Pages: 324

Brand: Lexus Pages: 609

Brand: NavLinkz Pages: 17

Brand: Falcon Pages: 36

Brand: Chrysler Pages: 17

2013 Pilot Touring

Brand: Honda Pages: 18

Brand: Honda Pages: 571

Brand: Dakota Digital Pages: 2

Retrotech RTX-64C-PU

Brand: Dakota Digital Pages: 3

Brand: Dakota Digital Pages: 2

Brand: Dakota Digital Pages: 12

KEYDEFENDER KD-MB-R5

Brand: Knox Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands