Chevrolet 2007 Colorado Owner'S Manual Download

Page: 409 / 500

If the flat tire is on the front of the vehicle,
position the jack to the rear of the front tire
in the pocket off of the frame.

If the flat tire is on the rear, position the jack
under the rear axle and get as close as
possible to the shock absorber.

4. Make sure the jack head is positioned so that

the rear axle is resting securely between the
grooves that are on the jack head.

5. Turn the wheel wrench clockwise to raise the

vehicle. Raise the vehicle far enough off the
ground so there is enough room for the spare
tire to fit under the wheel well.

Front Position

Rear Position

409

Summary of Contents for 2007 Colorado





















































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Colorado

Reviews:

Related manuals for 2007 Colorado

Brands by name

Popular brands

Chevrolet 2007 Colorado, Owner'S Manual

Search results

Summary of Contents for 2007 Colorado

Reviews:

Related manuals for 2007 Colorado

Brands by name

Popular brands