manualshive.com logo in svg

Chevrolet 2002 Impala, Owner'S Manual

The Chevrolet 2002 Impala Owner's Manual is a comprehensive guide that provides detailed information on the features, functions, and maintenance of this classic vehicle. Download this essential manual for free from manualshive.com, and gain access to valuable insights and instructions to enhance your Chevy driving experience.

Share
Download
background image

3-17

AUTO VOL (Automatic Volume): With automatic
volume, your audio system adjusts automatically to
make up for road and wind noise as you drive.

Set the volume at the desired level. Press this button to
select LOW, MEDIUM or HIGH. AVOL will appear on
the display. The volume level should always sound the
same to you as you drive. Each higher volume setting
allows for more volume compensation at faster vehicle
speeds. Then as you drive, automatic volume increases
the volume as necessary to overcome noise at any speed.
NONE will appear on the display if the radio cannot
determine the vehicle speed. If you don’t want to use
automatic volume, select OFF.

DISP (Display): Press this knob when the ignition is 
off to display the clock.

Finding a Station

BAND: Press this button to switch between AM, 
FM1 and FM2. The display shows your selection.

A

 

TUNE

"

: Turn this knob to choose radio stations.

A

 SEEK 

"

: Press the right or left arrow to seek to 

the next or previous station and stay there. The radio
will seek to stations with a strong signal only. The sound
will mute while seeking.

A

 PSCAN 

"

(Preset Scan): Press and hold one of 

the arrows for more than two seconds and the radio will
produce one beep. The radio will scan to the first preset
station stored on your pushbuttons, play for a few
seconds and flash the station frequency, then go on to
the next preset station. Press one of the arrows or one of
the pushbuttons again to stop scanning. SCAN will be
displayed whenever the tuner is in the preset scan mode.
The channel number (P1 through P6) will appear with
the frequency. In FM mode, this function will scan
through the current band such as FM1 or FM2. 
The radio will scan preset stations with a strong 
signal only. The sound will mute while scanning.

Summary of Contents for 2002 Impala














































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2002 Impala

Mazda 2011 Tribute Brochure & Specs preview
2011 Tribute
Brand: Mazda Pages: 4
GOgroove SMARTmini AUX Operating Manual preview
SMARTmini AUX
Brand: GOgroove Pages: 9
AC Schnitzer DKG Fitting Instructions Manual preview
DKG
Brand: AC Schnitzer Pages: 16
Yakima K614 Manual preview
K614
Brand: Yakima Pages: 12
FALCON RIDGE CF-1000-WD05 Instructions For Installation And Care preview
CF-1000-WD05
Brand: FALCON RIDGE Pages: 6
Ford FUSION 2014 Owner'S Manual preview
FUSION 2014
Brand: Ford Pages: 458
Metra Electronics 95-5810 Installation Instructions Manual preview
95-5810
Brand: Metra Electronics Pages: 8
Hama 00046080 Instructions For Use preview
00046080
Brand: Hama Pages: 2
LetsGoAero V2 Two-Bike Carrier User Manual preview
V2 Two-Bike Carrier
Brand: LetsGoAero Pages: 2
Honda Civic Coupe 2009 Owner'S Manual preview
Civic Coupe 2009
Brand: Honda Pages: 414
Chevrolet 2003 TraiIBIazer Owner'S Manual preview
2003 TraiIBIazer
Brand: Chevrolet Pages: 426
Chevrolet 2003 S10 Pickup Owner'S Manual preview
2003 S10 Pickup
Brand: Chevrolet Pages: 434
HUSKY LINERS 4707 Installation Manual preview
4707
Brand: HUSKY LINERS Pages: 3
Honda 2014 Accord Coupe EX Technology Reference Manual preview
2014 Accord Coupe EX
Brand: Honda Pages: 18
Kia Forte 2015 Features & Functions Manual preview
Forte 2015
Brand: Kia Pages: 10
VDO PITOT-TUBE SPEEDOMETER SET Installation Instructions preview
PITOT-TUBE SPEEDOMETER SET
Brand: VDO Pages: 5
Summit SUM-830450-1 Installation Instructions preview
SUM-830450-1
Brand: Summit Pages: 2
Seizmik 90049 Installation & Operation Manual preview
90049
Brand: Seizmik Pages: 6

Brands by name

Popular brands

Load more brands