manualshive.com logo in svg

Chevrolet 2002 Impala, Owner'S Manual, Page: 244 / 397

Share
Download
Chevrolet 2002 Impala Owner'S Manual Download Page 244

4-32

Loading Your Vehicle

Two labels on your vehicle show how much weight it
may properly carry. The Tire

-

Loading Information label

is on the inside of the trunk lid. The label tells you the
proper size, speed rating and recommended inflation
pressures for the tires on your vehicle. It also gives you
important information about the number of people that
can be in your vehicle and the total weight you can
carry. This weight is called the vehicle capacity weight
and includes the weight of all occupants, cargo and all
nonfactory

-

installed options.

The other label is the Certification label, found on the
rear edge of the driver’s door. It tells you the gross
weight capacity of your vehicle, called the Gross
Vehicle Weight Rating (GVWR). The GVWR includes
the weight of the vehicle, all occupants, fuel and cargo.
Never exceed the GVWR for your vehicle or the Gross
Axle Weight Rating (GAWR) for either the front or 
rear axle.

If you do have a heavy load, spread it out. Don’t carry
more than 167 pounds (75 kg) in your trunk.

Summary of Contents for 2002 Impala














































































































































































































































































































































































































Reviews:

No comments