manualshive.com logo in svg

Chevrolet 2002 Impala, Owner'S Manual, Page: 113 / 397

Share
Download
Chevrolet 2002 Impala Owner'S Manual Download Page 113

2-47

Tilt Wheel

A tilt steering wheel allows you to adjust the steering
wheel before you drive. You can raise the steering wheel
to the highest level to give your legs more room when
you exit and enter. The lever to adjust it is located on the
left side of the steering column.

To adjust the wheel, hold
the steering wheel and pull
the lever. Move the steering
wheel to a comfortable
level, then release the lever
to lock the wheel into place.

Turn Signal/Multifunction Lever

The lever on the left side of the steering column
includes the following:
D Turn Signal and Lane

-

Change Indicator

D Headlamp High/Low

-

Beam Changer

D Flash

-

to

-

Pass Feature

D Windshield Wipers
D Windshield Washer
D Cruise Control (If Equipped)
For more information on the exterior lamps, see
“Exterior Lamps” later in this section.

Summary of Contents for 2002 Impala














































































































































































































































































































































































































Reviews:

No comments