manualshive.com logo in svg

Chevrolet 2002 Express, Owner'S Manual

The Chevrolet 2002 Express Owner's Manual is a comprehensive guide to help owners understand and operate their vehicle efficiently. This manual is available for free download on our website, allowing you to access vital information on maintenance, troubleshooting, and vehicle features easily. Discover the full potential of your Chevrolet Express today!

Share
Download
background image

1-60

5. Pull the rest of the shoulder belt all the way out of

the retractor to set the lock.

6. To tighten the belt, feed the shoulder belt back into the  

retractor while you push down on the child restraint.
You may find it helpful to use your knee to push 
down on the child restraint as you tighten the belt.

7. Push and pull the child restraint in different

directions to be sure it is secure.

To remove the child restraint, just unbuckle the vehicle’s
safety belt and let it go back all the way. The safety belt
will move freely again and be ready to work for an adult
or larger child passenger.

Summary of Contents for 2002 Express




























































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2002 Express

Toyota 2011 Corolla LE Brochure preview
2011 Corolla LE
Brand: Toyota Pages: 19
Porsche Carrera GT Manual preview
Carrera GT
Brand: Porsche Pages: 192
Prorack K383 Fitting Instructions Manual preview
K383
Brand: Prorack Pages: 14
Blue Giant STRONGARM RVR303 Installation & Technical Manual preview
STRONGARM RVR303
Brand: Blue Giant Pages: 48
Victory 4x4 UNI-UPRS Install Instructions Manual preview
UNI-UPRS
Brand: Victory 4x4 Pages: 13
Bestop WrapAround Windjammer Installation Instructions Manual preview
WrapAround Windjammer
Brand: Bestop Pages: 7
STO N SHO SNS135a Installation Procedures Manual preview
SNS135a
Brand: STO N SHO Pages: 7
Jaeger J05252127 Fitting Instructions Manual preview
J05252127
Brand: Jaeger Pages: 17
Mercedes-Benz 2015 SLK Operator'S Manual preview
2015 SLK
Brand: Mercedes-Benz Pages: 358
Subaru Impreza 2.5GT Specifications preview
Impreza 2.5GT
Brand: Subaru Pages: 2
Subaru 1999 Impreza Owner'S Manual preview
1999 Impreza
Brand: Subaru Pages: 328
ACV 281178-28G-M Installation Manual preview
281178-28G-M
Brand: ACV Pages: 2
Classic Accessories OVER DRIVE PolyPRO 3 Car Cover Instructions preview
OVER DRIVE PolyPRO 3 Car Cover
Brand: Classic Accessories Pages: 2
Kargo Master 80070 Instruction Manual preview
80070
Brand: Kargo Master Pages: 17
Truma Mover S Installation & Operation Instructions preview
Mover S
Brand: Truma Pages: 16
National Cycle Quantum Wash'n'Wipe N30205 Assembly Instructions And Owner'S Manual preview
Quantum Wash'n'Wipe N30205
Brand: National Cycle Pages: 12
Rola RCLSH Fitting Instructions preview
RCLSH
Brand: Rola Pages: 2
Metra Electronics 95-5810 Installation Instructions Manual preview
95-5810
Brand: Metra Electronics Pages: 8

Brands by name

Popular brands

Load more brands