manualshive.com logo in svg

Chevrolet 2002 Express, Owner'S Manual

The Chevrolet 2002 Express Owner's Manual is a comprehensive guide to help owners understand and operate their vehicle efficiently. This manual is available for free download on our website, allowing you to access vital information on maintenance, troubleshooting, and vehicle features easily. Discover the full potential of your Chevrolet Express today!

Share
Download
background image

1-40

To make the belt shorter, pull its free end as shown until
the belt is snug.

Buckle, position and release it the same way as the lap
part of a lap

-

shoulder belt. If the belt isn’t long enough,

see “Safety Belt Extender” at the end of this section.

Make sure the release button on the buckle is positioned
so you would be able to unbuckle the safety belt quickly
if you ever had to.

Children

Everyone in a vehicle needs protection! This includes
infants and all other children. Neither the distance
traveled nor the age and size of the traveler changes 
the need, for everyone, to use safety restraints. In fact,
the law in every state in the United States and in every
Canadian province says children up to some age must be
restrained while in a vehicle.

Infants and Young Children 
(Except Cargo Vans with Passenger 
Air Bags)

Every time infants and young children ride in vehicles,
they should have the protection provided by the
appropriate restraint. Young children should not use 
the vehicle’s safety belts, unless there is no other choice.

Summary of Contents for 2002 Express




























































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2002 Express

PAC I GM3 Instruction Manual preview
I GM3
Brand: PAC Pages: 15
Jeep Wrangler2018 Owner'S Manual preview
Wrangler2018
Brand: Jeep Pages: 608
Dynojet 24xLC2 Linx Installation Manual preview
24xLC2 Linx
Brand: Dynojet Pages: 68
Kuda-Phonebase 283410 Installation Instruction preview
283410
Brand: Kuda-Phonebase Pages: 3
Yakima RoadShower 10G Quick Start Manual preview
RoadShower 10G
Brand: Yakima Pages: 12
TATA Motors Tata Indigo Diesel Owner'S Manual & Service Book preview
Tata Indigo Diesel
Brand: TATA Motors Pages: 190
Safe Fleet Prime Design HBR-E-FT33B Assembly Instructions Manual preview
Prime Design HBR-E-FT33B
Brand: Safe Fleet Pages: 12
r.LiNK RL2-NBT Manual preview
RL2-NBT
Brand: r.LiNK Pages: 20
Dakota Digital CRS-3000-3 Manual preview
CRS-3000-3
Brand: Dakota Digital Pages: 20
Scosche MAGICGRIP MGQDWD-CPO Instructions Manual preview
MAGICGRIP MGQDWD-CPO
Brand: Scosche Pages: 12
Edelbrock Honda XR400 Instruction Supplement preview
Honda XR400
Brand: Edelbrock Pages: 2
Hudson Super Six 1916 Reference Book preview
Super Six 1916
Brand: Hudson Pages: 77
Volkswagen 1963 1500 Instruction Manual preview
1963 1500
Brand: Volkswagen Pages: 68
HUSKY LINERS 47954 Installation Instructions preview
47954
Brand: HUSKY LINERS Pages: 4
iOttie HLCRIO138 Manual preview
HLCRIO138
Brand: iOttie Pages: 19
Discount Car Stereo A2DIY-JAG98 Quick Start Manual preview
A2DIY-JAG98
Brand: Discount Car Stereo Pages: 11
Phonocar 6/946 Instruction Manual preview
6/946
Brand: Phonocar Pages: 4
Bracketron MULTI VEHICLE MOUNT MVM-45-05 Installation Manual preview
MULTI VEHICLE MOUNT MVM-45-05
Brand: Bracketron Pages: 4

Brands by name

Popular brands

Load more brands