manualshive.com logo in svg

Chevrolet 2002 Express, Owner'S Manual

The Chevrolet 2002 Express Owner's Manual is a comprehensive guide to help owners understand and operate their vehicle efficiently. This manual is available for free download on our website, allowing you to access vital information on maintenance, troubleshooting, and vehicle features easily. Discover the full potential of your Chevrolet Express today!

Share
Download
background image

6-58

Cleaning Tires

To clean your tires, use a stiff brush with a tire cleaner.

NOTICE:

When applying a tire dressing always take care to
wipe off any overspray or splash from all painted
surfaces on the body or wheels of the vehicle.
Petroleum

-

based products may damage the paint

finish and tires.

Sheet Metal Damage

If your vehicle is damaged and requires sheet metal
repair or replacement, make sure the body repair shop
applies anti

-

corrosion material to the parts repaired or

replaced to restore corrosion protection.

Original manufacturer replacement parts will provide
the corrosion protection while maintaining the warranty.

Finish Damage

Any stone chips, fractures or deep scratches in the finish
should be repaired right away.

Minor chips and scratches can be repaired with touch

-

up

materials available from your dealer or other service
outlets. Larger areas of finish damage can be corrected
in your dealer’s body and paint shop.

Summary of Contents for 2002 Express




























































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2002 Express

U.S. General 97845 Set Up And Operating Instructions preview
97845
Brand: U.S. General Pages: 5
GMC SIERRA 2002 Manual preview
SIERRA 2002
Brand: GMC Pages: 499
Kia Amanti Owner'S Manual preview
Amanti
Brand: Kia Pages: 290
Cadillac 2003 Seville Owner'S Manual preview
2003 Seville
Brand: Cadillac Pages: 402
Cobra BAK R294 Manual preview
BAK R294
Brand: Cobra Pages: 2
DriveRight 8156OBD Installation Manual preview
8156OBD
Brand: DriveRight Pages: 16
Cadillac 2011 SRX CROSSOVER Owner'S Manual preview
2011 SRX CROSSOVER
Brand: Cadillac Pages: 416
TIE DOWN LONGRUN 86103 Assembly/Installation Instructions preview
LONGRUN 86103
Brand: TIE DOWN Pages: 2
Volvo S90 - ACCESSORY PANEL Owner'S Manual Supplement preview
S90 - ACCESSORY PANEL
Brand: Volvo Pages: 166
Summit Racing SUM-G1083 Assembly & Use Instructions preview
SUM-G1083
Brand: Summit Racing Pages: 11
RAM Cargo Van 2014 Owner'S Manual preview
Cargo Van 2014
Brand: RAM Pages: 666
Waeco PerfectView LCD350 Installation And Operating Manual preview
PerfectView LCD350
Brand: Waeco Pages: 36
Edelbrock Turbocharger 15012 Installation Instructions preview
Turbocharger 15012
Brand: Edelbrock Pages: 1
GMC Yukon XL Denali 2015 Owner'S Manual preview
Yukon XL Denali 2015
Brand: GMC Pages: 439
Porsche 92854 Owner'S Manual preview
92854
Brand: Porsche Pages: 145
Roadefend RDT401P Instruction Book preview
RDT401P
Brand: Roadefend Pages: 15
Mini COOPER Convertible Owner'S Manual preview
COOPER Convertible
Brand: Mini Pages: 168
Intellitronix BG6003 Installation Manual preview
BG6003
Brand: Intellitronix Pages: 11

Brands by name

Popular brands

Load more brands