manualshive.com logo in svg

Chevrolet 2002 Express, Owner'S Manual, Page: 250 / 411

Share
Download
Chevrolet 2002 Express Owner'S Manual Download Page 250

5-19

6. Start the engine and let it run until you can feel the

upper radiator hose getting hot. Watch out for the
engine cooling fan.

7. By this time, the coolant level inside the radiator

filler neck may be lower. If the level is lower, add
more of the proper DEX

-

COOL

R

 coolant mixture

through the filler neck until the level reaches the
base of the filler neck.

8. Then replace the pressure cap. At any time during

this procedure if coolant begins to flow out of the
filler neck, reinstall the pressure cap. Be sure the
arrows on the pressure cap line up like this.

Summary of Contents for 2002 Express




























































































































































































































































































































































































































Reviews:

No comments